| dc.contributor.author |
See, Kye Yak. |
| dc.contributor.author |
Ling, Y. |
| dc.contributor.author |
Koh, Wee Jin. |
| dc.contributor.author |
Ma, Jan. |
| dc.contributor.author |
Ho, S. F. |
| dc.date.accessioned |
2010-09-02T03:40:30Z |
| dc.date.available |
2010-09-02T03:40:30Z |
| dc.date.copyright |
2008 |
| dc.date.issued |
2010-09-02T03:40:30Z |
| dc.identifier.citation |
See, K. Y., Ling, Y., Koh, W. J., Ma, J., & Ho, S. F. (2008). Feasibility study of using porous metal as practical shielding material. In proceedings of the Asia-Pacific Symposium on Electromagnetic Compatibility and 19th International Zurich Symposium on Electromagnetic Compatibility: Singapore, (pp.451-454). |
| dc.identifier.uri |
http://hdl.handle.net/10220/6385 |
| dc.description.abstract |
This paper presents the feasibility study of using porous metal for electromagnetic shielding purposes. Using the highly porous aluminum (close to 90% porosity) as the material under study, its shielding effectiveness (SE) was studied systematically. A preliminary measurement was carried out to evaluate the SE of porous aluminum sample. This was followed by a full-wave EM modeling of the porous aluminum shielded box. Finally, a shielded enclosure was assembled using porous aluminum panels and the overall SE of this enclosure was measured. With the conventional installation method, the enclosure has been found to provide at least 60 dB shielding effectiveness in the frequency range of 250 kHz to 1 GHz. |
| dc.format.extent |
4 p. |
| dc.language.iso |
en |
| dc.rights |
© 2008 IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE. This material is presented to ensure timely dissemination of scholarly and technical work. Copyright and all rights therein are retained by authors or by other copyright holders. All persons copying this information are expected to adhere to the terms and constraints invoked by each author's copyright. In most cases, these works may not be reposted without the explicit permission of the copyright holder. http://www.ieee.org/portal/site This material is presented to ensure timely dissemination of scholarly and technical work. Copyright and all rights therein are retained by authors or by other copyright holders. All persons copying this information are expected to adhere to the terms and constraints invoked by each author's copyright. In most cases, these works may not be reposted without the explicit permission of the copyright holder. |
| dc.subject |
DRNTU::Engineering::Electrical and electronic engineering. |
| dc.subject |
DRNTU::Engineering::Materials. |
| dc.title |
Feasibility study of using porous metal as practical shielding material. |
| dc.type |
Conference Paper |
| dc.contributor.conference |
2008 Asia-Pacific Symposium on Electromagnetic Compatibility and 19th International Zurich Symposium on Electromagnetic Compatibility (19th:2008:Singapore) |
| dc.contributor.school |
School of Electrical and Electronic Engineering |
| dc.identifier.doi |
http://dx.doi.org/10.1109/APEMC.2008.4559909 |
| dc.description.version |
Published version |
| dc.contributor.organization |
Electromagnetic System Lab, DSO National Laboratories |
