mirage

Effect of cold work on the mechanical response of drawn ultra-fine gold wire

DSpace/Manakin Repository

 

Search DR-NTU


Advanced Search Subject Search

Browse

My Account

Effect of cold work on the mechanical response of drawn ultra-fine gold wire

Show simple item record

dc.contributor.author Narayanan, Karthic R.
dc.contributor.author Sridhar, Idapalapati
dc.contributor.author Subbiah, Sathyan
dc.date.accessioned 2011-08-12T06:55:01Z
dc.date.available 2011-08-12T06:55:01Z
dc.date.copyright 2010
dc.date.issued 2011-08-12
dc.identifier.citation Narayanan, K. R., Sridhar, I., & Subbiah, S. (2010). Effect of cold work on the mechanical response of drawn ultra-fine gold wire. Computational materials science, 49(1), S119-S125.
dc.identifier.uri http://hdl.handle.net/10220/6964
dc.description.abstract Effect of cold work on the mechanical response of drawn gold wire is studied using finite element (FE) simulations. The drawing simulations were conducted in a single stage as well as multi-stage, i.e. two steps for the equivalent area reduction on a micrometer size gold wire. The effect of wire drawing process parameters such as die angle, coefficient of friction and area reduction were considered for the simulations. A clear variation in residual stresses from tensile to compressive is seen across the wire cross-section. Mechanical properties are assessed via residual stress state and the hardness variation across the drawn wire cross-section; the hardness is determined using simulated micro-indentation tests. The effect of this stress is also observed in the indentation response. In the area of tensile residual stresses increasing pile-up was seen at the indenter edges, while in the area of compressive stresses the opposite was observed. The results clearly show the dominating role played by the residual compressive and tensile stresses across the wire section in its mechanical response.
dc.language.iso en
dc.rights © 2010 Elsevier. This is the author created version of a work that has been peer reviewed and accepted for publication by Computational Materials Science, Elsevier.  It incorporates referee’s comments but changes resulting from the publishing process, such as copyediting, structural formatting, may not be reflected in this document.  The published version is available at: http://dx.doi.org/10.1016/j.commatsci.2009.12.038.
dc.subject DRNTU::Engineering::Materials::Mechanical strength of materials.
dc.title Effect of cold work on the mechanical response of drawn ultra-fine gold wire
dc.type Journal Paper
dc.contributor.conference Symposium Q: Computational Materials Design at All Scales: From Theory to Application, International Conference on Materials for Advanced Technologies (ICMAT) 2009
dc.contributor.school School of Mechanical and Aerospace Engineering
dc.identifier.doi http://dx.doi.org/10.1016/j.commatsci.2009.12.038
dc.description.version Accepted version

Files in this item

Files Size Format View
Effect of Cold Work.pdf 697.0Kb PDF View/Open

This item appears in the following Collection(s)

Show simple item record

Statistics

Total views

All Items Views
Effect of cold work on the mechanical response of drawn ultra-fine gold wire 534

Total downloads

All Bitstreams Views
Effect of Cold Work.pdf 680

Top country downloads

Country Code Views
Singapore 153
United States of America 132
India 69
China 51
Iran 22

Top city downloads

city Views
Singapore 150
Mountain View 81
Beijing 16
Shanghai 11
Chlef 10