mirage

Progressive collapse resistance of RC beam-column sub-assemblages

DSpace/Manakin Repository

 

Search DR-NTU


Advanced Search Subject Search

Browse

My Account

Progressive collapse resistance of RC beam-column sub-assemblages

Show simple item record

dc.contributor.author Yu, Jun
dc.contributor.author Tan, Kang Hai
dc.date.accessioned 2011-09-09T04:35:07Z
dc.date.available 2011-09-09T04:35:07Z
dc.date.copyright 2010
dc.date.issued 2011-09-09
dc.identifier.citation Yu, J., & Tan, K. H. (2010). Progressive Collapse Resistance of RC Beam-Column Sub-assemblages. Design and Analysis of Protective Structures (3rd:2010:Singapore)
dc.identifier.uri http://hdl.handle.net/10220/7034
dc.description.abstract To investigate the structural resistance of reinforced concrete frames to mitigate progressive collapse, testing was conducted on two simplified RC beam-column sub-assemblages which were designed in accordance with ACI 318-05, with seismic or non-seismic detailing, under middle-column-removal scenarios. The sub-assemblages consisted of a two-span beam, a middle beam-column joint and two column stubs at both ends of the beam. Test results show that under increasing load at the middle beam-column joint, flexural action and compressive arch action are mobilised sequentially, followed by catenary action when the middle joint has undergone large deformations. Plus, the resistance of compressive arch action (with large axial compression in the beam) and catenary action (with axial tension along the beam) is greater than the flexural capacity based on conventional sectional plastic hinge analysis. Detailed information from the embedded strain gauges on longitudinal steel reinforcement along the whole beam was used to shed light on the development of structural mechanisms. Moreover, interaction diagrams of axial forces and bending moments at critical sections, such as joint interfaces and beam ends, were analysed to further illustrate different mechanisms. Finally, the analytical methods to calculate the respective capacities of flexural action and compressive arch action are presented in this paper.
dc.format.extent 10 p.
dc.language.iso en
dc.rights © 2010 Design and Analysis of Protective Structures.  This is the author created version of a work that has been peer reviewed and accepted for publication by Design and Analysis of Protective Structures.  It incorporates referee’s comments but changes resulting from the publishing process, such as copyediting, structural formatting, may not be reflected in this document.  The official conference website is: http://www.cee.ntu.edu.sg/Conferences/daps2010/index.htm.
dc.subject DRNTU::Engineering::Civil engineering::Structures and design.
dc.title Progressive collapse resistance of RC beam-column sub-assemblages
dc.type Conference Paper
dc.contributor.conference Design and Analysis of Protective Structures (3rd : 2010 : Singapore)
dc.contributor.research Protective Technology Research Centre
dc.contributor.school School of Civil and Environmental Engineering
dc.description.version Accepted version
dc.contributor.organization Defense Science & Technology Agency (DSTA)

Files in this item

Files Size Format View
Session 2 Paper 3 Yu.pdf 796.1Kb PDF View/Open

This item appears in the following Collection(s)

Show simple item record

Statistics

Total views

All Items Views
Progressive collapse resistance of RC beam-column sub-assemblages 943

Total downloads

All Bitstreams Views
Session 2 Paper 3 Yu.pdf 872

Top country downloads

Country Code Views
United States of America 244
Singapore 177
China 142
United Kingdom 42
Iran 30

Top city downloads

city Views
Singapore 171
Mountain View 155
Beijing 73
Manchester 12
Taipei 11

Downloads / month

  2014-09 2014-10 2014-11 total
Session 2 Paper 3 Yu.pdf 0 0 19 19