| dc.contributor.author |
Ding, J. |
| dc.contributor.author |
Liu, Bing Hai |
| dc.contributor.author |
Dong, Zhili |
| dc.contributor.author |
Zhong, Z. Y. |
| dc.contributor.author |
Lin, J. Y. |
| dc.contributor.author |
White, T. |
| dc.date.accessioned |
2012-07-06T01:25:49Z |
| dc.date.available |
2012-07-06T01:25:49Z |
| dc.date.copyright |
2003 |
| dc.date.issued |
2012-07-06 |
| dc.identifier.citation |
Ding, J., Liu, B. H., Dong, Z. L., Zhong, Z. Y., Lin, J. Y., & White, T. (2004). The preparation of Al2O3/M (Fe, Co, Ni) nanocomposites by mechanical alloying and the catalytic growth of carbon nanotubes. Composites Part B: engineering, 35(2), 103-109. |
| dc.identifier.uri |
http://hdl.handle.net/10220/8294 |
| dc.description.abstract |
Mechanical alloying was employed to produce Al2O3/M (M=Fe, Co, Ni) nanocomposites. It was found that high-energy mechanical milling could realize not only drastic refinement but also the well dispersion of catalyst precursors in oxide matrixes. After mechanical milling, the solid-state alloying and the accelerated substitutional reactions were observed between the parent oxides. The as-obtained Al2O3/M nanocomposites possessed the fine-grained and porous structures and thus high reducibility. Large-scale formation of multiwalled and single-walled carbon nanotubes were achieved by using these mechanical alloying-derived Al2O3/M nanocomposites. |
| dc.language.iso |
en |
| dc.relation.ispartofseries |
Composites Part B: engineering |
| dc.rights |
© 2004 Elsevier. This is the author created version of a work that has been peer reviewed and accepted for publication by Composites: Part B, Elsevier. It incorporates referee’s comments but changes resulting from the publishing process, such as copyediting, structural formatting, may not be reflected in this document. The published version is available at: http://dx.doi.org/10.1016/S1359-8368(03)00050-7. |
| dc.subject |
DRNTU::Engineering::Materials. |
| dc.title |
The preparation of Al2O3/M (Fe, Co, Ni) nanocomposites by mechanical alloying and the catalytic growth of carbon nanotubes. |
| dc.type |
Journal Article |
| dc.contributor.school |
School of Materials Science and Engineering |
| dc.identifier.doi |
http://dx.doi.org/10.1016/S1359-8368(03)00050-7 |
| dc.description.version |
Accepted version |
