Please use this identifier to cite or link to this item:
https://hdl.handle.net/10356/69052
Title: | A multi-mode sensor : merge an ambient light sensor into a CMOS image sensor | Authors: | Wang, Yue | Keywords: | DRNTU::Engineering::Electrical and electronic engineering | Issue Date: | 2016 | Source: | Wang, Y. (2016). A multi-mode sensor : merge an ambient light sensor into a CMOS image sensor. Master's thesis, Nanyang Technological University, Singapore. | Abstract: | Ambient light sensors are quite often used in the portable electronic devices. In a smartphone, the ambient light sensor enables automatic control of display backlight brightness over a wide range of illumination conditions from a dark environment to direct sunlight. The control reduces the power consumption and improves visibility under varying lighting conditions. The conventional ambient light sensor consists of two parts: photodetectors and conversion circuits. A typical conversion circuit can be current-mode analog-to-digital convertor (ADC); pulse-width modulation (PWM) module; or pulse-frequency modulation (PFM) module. In this thesis, a new conversion circuit is proposed. The proposed ADC employs a two-step architecture combined with the time-domain measurement technique. A current-mode ADC is adopted as the coarse ADC. The residue current left by the coarse A/D conversion is finely quantized by a PWM module. The proposed architecture can improve the accuracy of detection, since PWM module can correct the possible coarse conversion errors. Meanwhile, it can shorten the conversion time, since the input current of the PWM module is compressed by the coarse ADC into a small range. A multi-mode sensor can be developed by merging the proposed ambient light sensor into a CMOS image sensor. Since power consumption plays an important role in the sensor device, a low-power application can be achieved by separating the power supply and switching them in different modes. In other words, during ambient light sensing, the circuits for picture/video readout are in standby mode and do not consume power; and vice versa. The thesis presents the design of the proposed multi-mode sensor. The chip with 64×64 pixel array is implemented in AMS 0.35 µm 2P4M CMOS technology. In the following sections of the thesis, it will show the whole design flow of the proposed sensor chip. | URI: | https://hdl.handle.net/10356/69052 | DOI: | 10.32657/10356/69052 | Schools: | School of Electrical and Electronic Engineering | Research Centres: | Satellite Engineering Centre | Fulltext Permission: | open | Fulltext Availability: | With Fulltext |
Appears in Collections: | EEE Theses |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
Thesis_WangYue.pdf | 5.94 MB | Adobe PDF | View/Open |
Page view(s) 50
446
Updated on Mar 28, 2024
Download(s) 10
342
Updated on Mar 28, 2024
Google ScholarTM
Check
Altmetric
Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.