Showing results 1 to 20 of 43
next >
| Issue Date | Title | Author(s) |
 | 2018 | 3D bioprinting processes : a perspective on classification and terminology | Lee, Jia Min; Sing, Swee Leong; Zhou, Miaomiao; Yeong, Wai Yee |
| 2020 | 3D direct printing of silicone meniscus implant using a novel heat-cured extrusion-based printer | Luis, Eric; Pan, Matthew Houwen; Sing, Swee Leong; Bajpai, Ram; Song, Juha; Yeong, Wai Yee |
| 2020 | 3D printed silicone meniscus implants : influence of the 3D printing process on properties of silicone implants | Luis, Eric; Pan, Matthew Houwen; Bastola, Anil Kumar; Bajpai, Ram; Sing, Swee Leong; Song, Juha; Yeong, Wai Yee |
| | 2017 | Additive manufacturing in unmanned aerial vehicles (UAVs): Challenges and potential | Goh, G. D.; Agarwala, Shweta; Goh, G. L.; Dikshit, Vishwesh; Sing, Swee Leong; Yeong, Wai Yee |
| 2019 | Additive manufacturing of multiple materials by selective laser melting : Ti-alloy to stainless steel via a Cu-alloy interlayer | Tey, Cher Fu; Tan, Xipeng; Sing, Swee Leong; Yeong, Wai Yee |
| 2016 | Bioprinting in cardiovascular tissue engineering: a review | Lee, Jia Min; Sing, Swee Leong; Tan, Edgar Yong Sheng; Yeong, Wai Yee |
| 2020 | Bioprinting of multimaterials with computer-aided design/computer-aided manufacturing | Lee, Jia Min; Sing, Swee Leong; Yeong, Wai Yee |
| 2016 | Characterisation of micro-lattices fabricated by selective laser melting | Wiria, Florencia Edith; Yeong, Wai Yee; Sing, Swee Leong |
| 2017 | Characterization of mechanical properties and fracture mode of additively manufactured carbon fiber and glass fiber reinforced thermoplastics | Goh, Guo Dong; Dikshit, Vishwesh; Nagalingam, Arun Prasanth; Goh, Guo Liang; Agarwala, Shweta; Sing, Swee Leong; Wei, Jun; Yeong, Wai Yee |
| | 2016 | Characterization of Titanium Lattice Structures Fabricated by Selective Laser Melting Using an Adapted Compressive Test Method | Sing, Swee Leong; Yeong, Wai Yee; Wiria, Florencia Edith; Tay, B. Y. |
| 2014 | A Comparative Study on Selective Laser Melting and Electron Beam Melting Process for Orthopedic Implants | Khalid Rafi, Haludeen; Sing, Swee Leong; An, Jia; Yeong, Wai Yee; Leong, Kah Fai |
| | 2017 | Crack monitoring and failure investigation on inkjet printed sandwich structures under quasi-static indentation test | Dikshit, Vishwesh; Nagalingam, Arun Prasanth; Yap, Yee Ling; Sing, Swee Leong; Yeong, Wai Yee; Wei, Jun |
| 2017 | Direct selective laser sintering and melting of ceramics : a review | Sing, Swee Leong; Yeong, Wai Yee; Wiria, Florencia Edith; Tay, Bee Yen; Zhao, Ziqiang; Zhao, Lin; Tian, Zhiling; Yang, Shoufeng |
| 2018 | Effect of heat treatment on cobalt-chromium-molybdenum alloy fabricated by selective laser melting | Sing, Swee Leong; Yeong, Wai Yee |
| 2019 | Effect of solution heat treatment on microstructure and mechanical properties of laser powder bed fusion produced cobalt-28chromium-6molybdenum | Sing, Swee Leong; Huang, Sheng; Yeong, Wai Yee |
| 2018 | Effects of re-melting strategies on densification behavior and mechanical properties of selective laser melted AlSi10Mg parts | Chua, Chee Kai; Tian, Xuelei; Yu, Wenhui; Sing, Swee Leong |
 | 2021 | Emerging metallic systems for additive manufacturing : in-situ alloying and multi-metal processing in laser powder bed fusion | Sing, Swee Leong; Huang, Sheng; Goh, Guo Dong; Goh, Guo Liang; Tey, Cher Fu; Tan, Joel Heang Kuan; Yeong, Wai Yee |
| 2017 | Fabrication of titanium based biphasic scaffold using selective laser melting and collagen immersion | Sing, Swee Leong; Wang, Shuai; Agarwala, Shweta; Wiria, Florencia Edith; Ha, Thi Mai Hoa; Yeong, Wai Yee |
| 2016 | Fabrication of titanium lattice structures by selective laser melting for osteochondral tissue regeneration | Wang, Shuai; Sing, Swee Leong; Agarwala, Shweta; Yeong, Wai Yee |
| 2019 | Influence of re-melting on surface roughness and porosity of AlSi10Mg parts fabricated by selective laser melting | Yu, Wenhui; Sing, Swee Leong; Chua, Chee Kai; Tian, Xuelei |
