Showing results 1 to 20 of 31
next >
| Issue Date | Title | Author(s) |
 | 1997 | Applications and characterisation of novel thermal sensitive polymer latexes | Tam, Kam Chiu; Yue, Chee Yoon |
| | 2012 | Comparison of different molds (epoxy, polymer and silicon) for microfabrication by hot embossing technique | Gupta, A.; Tang, P. S.; Jena, Rajeeb Kumar; Yue, Chee Yoon; Lam, Yee Cheong |
| 2001 | Compatibilization of polycarbonate and thermotropic liquid crystalline polymer blends | Tan, Lay Poh. |
 | 2012 | Cyclic olefin copolymer based microfluidic devices for biochip applications : ultraviolet surface grafting using 2-methacryloyloxyethyl phosphorylcholine | Jena, Rajeeb Kumar; Yue, Chee Yoon |
| | 2018 | Development of 3D MoO3/graphene aerogel and sandwich-type polyaniline decorated porous MnO2−graphene hybrid film based high performance all-solid-state asymmetric supercapacitors | Ghosh, Kalyan; Yue, Chee Yoon |
| 1994 | Development of advanced fibre reinforced thermoplastics with consistent and reliable quality | Yue, Chee Yoon; Boey, Freddy Yin Chiang; Khor, Khiam Aik |
| 1998 | Development of high performance polymer blends | Yue, Chee Yoon; Tam, Kam Chiu |
| 2002 | Development of liquid crystalline polymer blends for the electronic industry | Hu, Xiao; Tam, Kam Chiu; Yue, Chee Yoon |
| | 2012 | Effect of residual stresses in injection molded cyclic olefin copolymer during microfabrication : hot embossing as well as thermal bonding | Jena, Rajeeb Kumar; Dev, Kapil; Yue, Chee Yoon; Asundi, Anand Krishna |
| 2001 | Effect of transcrystallinity on the mechanical properties of glass fiber reinforced polypropylene composite | Lum, Dennis Li Ming. |
| | 2014 | Effects of primer and annealing treatments on the shear strength between anodized Ti6Al4V and epoxy | He, Peigang; Huang, Mingyue; Fisher, Stefan; Yue, Chee Yoon; Yang, Jinglei |
| | 2014 | Enhanced interphase between epoxy matrix and carbon fiber with carbon nanotube-modified silane coating | Yu, Bin; Jiang, Zhenyu; Tang, Xiu-Zhi; Yue, Chee Yoon; Yang, Jinglei |
| | 2011 | Evaluation of roughness, hardness, and strength of AA 6061 molds for manufacturing polymeric microdevices | Tran, Nhat Khoa; Lam, Yee Cheong; Yue, Chee Yoon; Tan, Ming-Jen |
| 2017 | Failure Behavior of Unidirectional Composites under Compression Loading: Effect of Fiber Waviness | Nair, Swaroop Narayanan; Dasari, Aravind; Yue, Chee Yoon; Narasimalu, Srikanth |
| 1996 | Finite element simulation of single fiber pullout test | Chew, Gerard Thean Poh. |
| 2004 | Flow pattern and heat transfer in a tightly-spaced finned channel | Chua, Leok Poh.; Huang, Xiaoyang. |
| 1997 | Interfacial properties of hot-isostatically-pressed metal-matrix composites | Lee, Li Ling. |
| 1995 | The interfacial properties of Kevlar fibre reinforced nylon composite | Looi, Hong Cheong. |
| | 2014 | Lignin-assisted direct exfoliation of graphite to graphene in aqueous media and its application in polymer composites | Liu, Wanshuang; Zhou, Rui; Zhou, Dan; Ding, Guoqiang; Soah, Jie Miin; Yue, Chee Yoon; Lu, Xuehong |
| 2000 | Modeling of polycarbonate and thermotropic liquid crystalline polymer blends | Yang, Yue Xiang |
