Project title
A18B1b0061

Publications
(All)

Results 1-20 of 23 (Search time: 0.045 seconds).

Accelerated discovery of multi-property optimized Fe–Cu alloys   [2024]

Xu, Xiaobao; Tan, Li Ping; Davidson, Karl Peter; Padhy, Shakti P.; Chaudhary, V.; Ramanujan, Raju V.

Additive manufacturing of carbon steel with site-specific compositions and properties using binder jetting and spark plasma sintering   [2024]

Chiang, Po-Ju; Sun, Li; Tan, Li Ping; Singham, Jonathan Jeevan; Zhao, Yida; Hu, Huanlong; Aik, Khor Khiam; Ramanujan, Raju V.; Jangam, John Samuel Dilip; Lai, Chang Quan

Directed energy deposition of metals: processing, microstructures, and mechanical properties   [2022]

Li, Shihao; Kumar, Punit; Chandra, Shubham; Ramamurty, Upadrasta

Effect of dual phase structure induced by chemical segregation on hot tearing reduction in additive manufacturing   [2023]

Guo, Chaoyang; Wei, Siyuan; Wu, Zhenggang; Wang, Pei; Zhang, Baicheng; Ramamurty, Upadrasta; Qu, Xuanhui

Effect of short-range ordering and grain boundary segregation on shear deformation of CoCrFeNi high-entropy alloys with Al addition   [2022]

Babicheva, Rita; Jarlöv, Asker; Zheng, Han; Dmitriev, Sergey; Korznikova, Elena; Nai, Sharon Mui Ling; Ramamurty, Upadrasta; Zhou, Kun

High strength Hadfield steel produced using laser powder bed fusion of mixed powders   [2023]

Cheng, Baisong; Wei, Fengxia; Teh, Wei Hock; Cheong, Kok Heng; Lee, Jing Jun; Chew, Li Tian; Lau, Kwang Boon; Ma, Tang Hieu Binh; Ng, Chee Koon; Wang, Pei; Ramamurty, Upadrasta; Tan, Cheng Cheh

The importance of fracture toughness evaluation for additively manufactured metals   [2024]

Paul, Moses J.; Kruzic, Jamie J.; Ramamurty, Upadrasta; Gludovatz, Bernd

Low lattice thermal conductivity in Zr-doped Ti2NiCoSnSb thermoelectric double half Heusler alloys   [2023]

Mishra, Soumya Ranjan; Tan, Li Ping; Trivedi, Vikrant; Battabyal, Manjusha; Krishnan, P. S. Sankara Rama; Repaka, Durga Venkata Maheswar; Yadav, Satyesh Kumar; Ramanujan, Raju Vijayaraghavan; Murty, Budaraju Srinivasa

Mechanism analysis of grain growth dominated by alloy composition gradients during powder bed fusion   [2023]

Yao, Liming; Xiao, Zhongmin; Hoo, Zhiongsheng; Tang, Chao; Qiao, Jing; Zhang, Yanmei

A micropillar compression investigation into the plastic flow properties of additively manufactured alloys   [2022]

Li, Shihao; Zhao, Yakai; Radhakrishnan, Jayaraj; Ramamurty, Upadrasta

Microstructure-property correlations in as-built and heat-treated compositionally graded stainless steel 316L-Inconel 718 alloy fabricated by laser powder bed fusion   [2023]

Wen, Yaojie; Gao, Jianbao; Narayan, Ramasubramanian Lakshmi; Wang, Pei; Zhang, Lijun; Zhang, Baicheng; Ramamurty, Upadrasta; Qu, Xuanhui

Modulating fracture toughness through processing-mediated mesostructure in additively manufactured Al-12Si alloy   [2022]

Jamshidian, Mostafa; Promoppatum, Patcharapit; Ramamurty, Upradrasta; Jhon, Mark Hyunpong

An optimized CFD-DEM method for particle collision and retention analysis of two-phase flow in a reduced-diameter pipe   [2022]

Yao, Liming; Liu, Yuxi; Liu, Jubao; Xiao, Zhongmin; Xie, Kun; Cao, Huihui; Zhang, Hailong

Optimized hot working parameters of Fe2.5Ni2.5CrAl multi-principal element alloys   [2022]

Qiao, Ling; Ramanujan, Raju V.; Zhu, Jingchuan

Recrystallization-based grain boundary engineering of 316L stainless steel produced via selective laser melting   [2020]

Gao, Shubo; Hu, Zhiheng; Duchamp, Martial; Krishnan, P. S. Sankara Rama; Tekumalla, Sravya; Song, Xu; Seita, Matteo

The role of the solidification structure on orientation-dependent hardness in stainless steel 316L produced by laser powder bed fusion   [2022]

Tekumalla, Sravya; Selvarajou, Balaji; Raman, Sudharshan; Gao, Shubo; Seita, Matteo