Please use this identifier to cite or link to this item:
|Title:||Yb2O3 doped yttrium-alumino-silicate nano-particles based LMA optical fibers for high-power fiber lasers||Authors:||Kir'yanov, A. V.
Barmenkov, Y. O.
Boyland, A. J.
Lucio-Martinez, J. L.
Paul, Mukul Chandra
Bhadra, Shyamal Kumar
Sahu, Jayanta Kumar
|Keywords:||DRNTU::Engineering::Electrical and electronic engineering||Issue Date:||2012||Source:||Paul, M. C., Kir'yanov, A. V., Barmenkov, Y. O., Das, S., Pal, M., Bhadra, S. K., et al. (2012). Yb2O3 Doped Yttrium-Alumino-Silicate Nano-Particles Based LMA Optical Fibers for High-Power Fiber Lasers. Journal of Lightwave Technology, 30(13), 2062-2068.||Series/Report no.:||Journal of lightwave technology||Abstract:||Yb2O3 doped yttrium-rich alumino-silicate nano-particles based D- and P- (pentagonal) shaped optical fibers with core diameter ~ 30-35 μ m are fabricated using the conventional MCVD process and solution doping technique. Parameters of different stages of the fiber preforms fabrication are optimized to get uniform distributions of Al, Y, F, and Yb ions in the core region, ensured by the data of an EPMA analysis. In the presence of small amounts of fluorine, the size of nano-particles is maintained within 5-10 nm; the EDX data reveal that the nano-particles are rich in yttrium-alumino-silicate phase and are dispersed uniformly across the preforms core. The critical parameters of the processes involved at the fibers fabrication along with the nano-structuring and spectroscopic features are highlighted. It is shown experimentally that the drawn D- and P- shaped fibers support high laser efficiency ( ~ 80% at 976-nm pumping) and demonstrate negligible photodarkening.||URI:||https://hdl.handle.net/10356/96786
|DOI:||http://dx.doi.org/10.1109/JLT.2012.2191391||Rights:||© 2012 IEEE.||metadata.item.grantfulltext:||none||metadata.item.fulltext:||No Fulltext|
|Appears in Collections:||EEE Journal Articles|
Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.