dc.contributor.authorZhang, Runqi
dc.contributor.authorZhu, Lei
dc.contributor.authorLuo, Sha
dc.date.accessioned2013-09-13T02:08:42Z
dc.date.available2013-09-13T02:08:42Z
dc.date.copyright2012en_US
dc.date.issued2012
dc.identifier.urihttp://hdl.handle.net/10220/13452
dc.description.abstractA slotted circular patch resonator is proposed to design a dual-mode dual-band bandpass filter in this work. Three sets of slots are etched into a circular patch. First, four arc-oriented slots are etched to lower the TM01 mode resonant frequency. Then, four radial-oriented slots are etched from the edge of the circular patch to bring down the resonant frequency of the TM21 mode. By changing these two sets of slots, the TM01 and TM21 resonant modes are adjusted to make up the second dual-pole passband. Next, a slot is etched into the center of the circular patch to split the pair of TM11 degenerate modes, which forms the first dual-mode passband. Two high impedance transmission lines are connected to the resonator at a 90° angle along the patch. To increase the out-of-band rejection, two more transmission zeros are introduced by cross-coupling between the input and output feed lines. Two prototype dual-band filters are designed with different frequency ratios so as to verify the design principle. The measured results agree well with the simulated ones.en_US
dc.language.isoenen_US
dc.rights© 2012 IEEEen_US
dc.subjectDRNTU::Engineering::Electrical and electronic engineering
dc.titleCharacterization of a slotted circular patch resonator for adjustable dual-mode dual-band bandpass filtersen_US
dc.typeConference Paper
dc.contributor.conferenceIEEE MTT-S International Microwave Symposium Digest (2012 : Montreal, Canada)en_US
dc.contributor.schoolSchool of Electrical and Electronic Engineeringen_US
dc.identifier.doihttp://dx.doi.org/10.1109/MWSYM.2012.6258268


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record