Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/99528
Title: Rate-dependent constitutive modeling of polymer subjected to dynamic loading
Authors: Yuan, Jian Ming
Ma, Jan
Liu, Jian Fei
Tan, Geoffrey E. B.
Keywords: DRNTU::Engineering::Materials
Issue Date: 2012
Source: Yuan, J. M., Ma, J., Tan, G. E. B., & Liu, J. F. (2012). Rate-dependent constitutive modeling of polymer subjected to dynamic loading. Solid state phenomena, 185, 119-121.
Series/Report no.: Solid state phenomena
Abstract: This paper proposes an effective and systematical method to obtain reliable rate-dependent material models used in FEM simulation for polymers. Compressive stress-strain curves of two types of polymer are obtained at different strain rates. Rate-dependent elastic-plastic models are applied to describe the observed rate-dependent behaviors, whereby the input data of material model are determined from the test data obtained. Verification of the material models is proposed via comparing FEM simulation with test data of quasi-static tension tests and dynamic compression tests of different strain rates.
URI: https://hdl.handle.net/10356/99528
http://hdl.handle.net/10220/13744
DOI: http://dx.doi.org/10.4028/www.scientific.net/SSP.185.119
Fulltext Permission: none
Fulltext Availability: No Fulltext
Appears in Collections:TL Journal Articles

Google ScholarTM

Check

Altmetric

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.