Please use this identifier to cite or link to this item:
https://hdl.handle.net/10356/101458| Title: | Design of a 843MHz 35µW SAW oscillator using device and circuit co-design technique | Authors: | Zhu, Yao Zheng, Yuanjin Wong, Chee-Leong Je, Minkyu Lynn, Khine Kropelnicki, Piotr Lin, Julius Tsai Ming |
Keywords: | DRNTU::Engineering::Electrical and electronic engineering | Issue Date: | 2012 | Source: | Zhu, Y., Zheng, Y., Wong, C. L., Je, M., Lynn, K., Kropelnicki, P., & Lin, J. T. M. (2012). Design of a 843MHz 35µW SAW oscillator using device and circuit co-design technique. 2012 IEEE Asia Pacific Conference on Circuits and Systems (APCCAS), pp.328-331. | Abstract: | This paper presents a 35μW SAW oscillator operating at 843MHz. The low power consumption is achieved through the co-design of SAW resonator and oscillator circuit with the aid of an accurate equivalent circuit model of SAW resonator. The equivalent circuit model of SAW resonator is improved from idealized lumped circuit model by accurate extraction and derivation of design parameters from FEM simulation in ANSYS. The simulated phase noise is -139.8dBc/Hz at 100KHz offset. | URI: | https://hdl.handle.net/10356/101458 http://hdl.handle.net/10220/16342 |
DOI: | http://dx.doi.org/10.1109/APCCAS.2012.6419038 | Fulltext Permission: | none | Fulltext Availability: | No Fulltext |
| Appears in Collections: | EEE Conference Papers |
Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.