Please use this identifier to cite or link to this item:
|Title:||Swift heavy ion induced surface and microstructural evolution in metallic glass thin films||Authors:||Thomas, Hysen
Avasthi, D. K.
Ramanujan, Raju V.
Al-Harthi, S. H.
Anantharaman, M. R.
Al-Omari, I. A.
|Issue Date:||2012||Source:||Thomas, H., Thomas, S., Ramanujan, R. V., Avasthi, D. K., Al-Omari, I. A., Al-Harthi, S., et al. (2012). Swift heavy ion induced surface and microstructural evolution in metallic glass thin films. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 287, 85-90.||Series/Report no.:||Nuclear instruments and methods in physics research section B : beam interactions with materials and atoms||Abstract:||Swift heavy ion induced changes in microstructure and surface morphology of vapor deposited Fe–Ni based metallic glass thin films have been investigated by using atomic force microscopy, X-ray diffraction and transmission electron microscopy. Ion beam irradiation was carried out at room temperature with 103 MeV Au9+ beam with fluences ranging from 3 × 1011 to 3 × 1013 ions/cm2. The atomic force microscopy images were subjected to power spectral density analysis and roughness analysis using an image analysis software. Clusters were found in the image of as-deposited samples, which indicates that the film growth is dominated by the island growth mode. As-deposited films were amorphous as evidenced from X-ray diffraction; however, high resolution transmission electron microscopy measurements revealed a short range atomic order in the samples with crystallites of size around 3 nm embedded in an amorphous matrix. X-ray diffraction pattern of the as-deposited films after irradiation does not show any appreciable changes, indicating that the passage of swift heavy ions stabilizes the short range atomic ordering, or even creates further amorphization. The crystallinity of the as-deposited Fe–Ni based films was improved by thermal annealing, and diffraction results indicated that ion beam irradiation on annealed samples results in grain fragmentation. On bombarding annealed films, the surface roughness of the films decreased initially, then, at higher fluences it increased. The observed change in surface morphology of the irradiated films is attributed to the interplay between ion induced sputtering, volume diffusion and surface diffusion.||URI:||https://hdl.handle.net/10356/100271
|ISSN:||0168-583X||DOI:||http://dx.doi.org/10.1016/j.nimb.2012.05.039||Fulltext Permission:||none||Fulltext Availability:||No Fulltext|
|Appears in Collections:||MSE Journal Articles|
Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.