dc.contributor.authorLee, Chi King
dc.contributor.authorChiew, Sing Ping
dc.contributor.authorJiang, Jin
dc.date.accessioned2014-03-10T07:32:11Z
dc.date.available2014-03-10T07:32:11Z
dc.date.copyright2013en_US
dc.date.issued2013
dc.identifier.citationLee, C. K., Chiew, S. P., & Jiang, J. (2013). 3D residual stress modelling of welded high strength steel plate-to-plate joints. Journal of Constructional Steel Research, 84, 94-104.en_US
dc.identifier.issn0143-974Xen_US
dc.identifier.urihttp://hdl.handle.net/10220/18891
dc.description.abstractA numerical investigation on the residual stress distributions near the weld toe of plate-to-plate Y-joints fabricated by using high strength steel (HSS) plate is carried out in this study. A fully 3D sequentially coupled thermal-mechanical modelling procedure is employed for residual stress analysis for the HSS plate-to-plate joints. Two specimens respectively fabricated by welding at ambient temperature and at a preheating temperature of 100°C are investigated. The 3D numerical models reveal that while high tensile transverse residual stress, which is perpendicular to the weld, is generated near the weld toe of the joint middle section, proper preheating could significantly reduce the magnitude of the residual stress. In addition, it is found that the welding direction between successive weld pass could also affect the maximum residual stress value near the chord weld toe.en_US
dc.format.extent36 p.en_US
dc.language.isoenen_US
dc.relation.ispartofseriesJournal of constructional steel researchen_US
dc.rights© 2013 Elsevier. This is the author created version of a work that has been peer reviewed and accepted for publication by Journal of Constructional Steel Research, Elsevier. It incorporates referee’s comments but changes resulting from the publishing process, such as copyediting, structural formatting, may not be reflected in this document. The published version is available at: [DOI:http://dx.doi.org/10.1016/j.jcsr.2013.02.007].en_US
dc.subjectDRNTU::Engineering::Civil engineering::Structures and design
dc.title3D residual stress modelling of welded high strength steel plate-to-plate jointsen_US
dc.typeJournal Article
dc.contributor.schoolSchool of Civil and Environmental Engineeringen_US
dc.identifier.doihttp://dx.doi.org/10.1016/j.jcsr.2013.02.007
dc.description.versionAccepted versionen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record