dc.contributor.authorYeo, L. P
dc.contributor.authorLok, B. K.
dc.contributor.authorNguyen, Q. M. P.
dc.contributor.authorLu, C. W.
dc.contributor.authorLam, Y. C.
dc.date.accessioned2014-04-29T08:40:16Z
dc.date.available2014-04-29T08:40:16Z
dc.date.copyright2014en_US
dc.date.issued2014
dc.identifier.citationYeo, L. P., Lok, B. K., Nguyen, Q. M. P., Lu, C. W., & Lam, Y. C. (2014). Selective surface modification of PET substrate for inkjet printing. The International Journal of Advanced Manufacturing Technology, 71(9-12), 1749-1755.en_US
dc.identifier.issn0268-3768en_US
dc.identifier.urihttp://hdl.handle.net/10220/19273
dc.description.abstractWe present the results of inkjet printing of poly(3,4-ethylenedioxythiophene)/poly(4-styrenesulphonate) (PEDOT/PSS) conductive ink on selective surface-modified polyethylene terephathalate substrate via vapor coating of 1H,1H,2H,2H-perfluorooctyltriethoxysilane (FOTS) and atmospheric oxygen plasma. Selective surface modification was carried out using a nickel stencil with ~50 μm line width and spacing. PEDOT/PSS-conductive ink was found to wet the hydrophilic surface-treated line widths spontaneously while avoiding the hydrophobic-treated regions.en_US
dc.language.isoenen_US
dc.relation.ispartofseriesInternational journal of advanced manufacturing technologyen_US
dc.rights© 2014 Springer Verlag.en_US
dc.subjectDRNTU::Engineering::Aeronautical engineering::Aircraft
dc.titleSelective surface modification of PET substrate for inkjet printingen_US
dc.typeJournal Article
dc.contributor.researchSingapore Institute of Manufacturing Technologyen_US
dc.contributor.schoolSchool of Mechanical and Aerospace Engineeringen_US
dc.identifier.doihttp://dx.doi.org/10.1007/s00170-014-5634-9
dc.identifier.rims178326


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record