dc.contributor.authorZuo, Guangzhi
dc.contributor.authorGuan, Guoqiang
dc.contributor.authorWang, Rong
dc.date.accessioned2014-06-10T01:29:46Z
dc.date.available2014-06-10T01:29:46Z
dc.date.copyright2014en_US
dc.date.issued2014
dc.identifier.citationZuo, G., Guan, G., & Wang, R. (2014). Numerical modeling and optimization of vacuum membrane distillation module for low-cost water production. Desalination, 339, 1-9.en_US
dc.identifier.issn0011-9164en_US
dc.identifier.urihttp://hdl.handle.net/10220/19587
dc.description.abstractA two-dimensional numerical model, involving energy conservation, momentum transport and continuity equations, was developed to provide the profiles of temperature, velocity and pressure of vacuum membrane distillation (VMD) process using hollow fiber module. The theoretical prediction was in good agreement with the experimental results from literature. Four design and operation variables, including feed temperature, hollow fiber length, feed volume flow rate and vacuum pressure, were optimized to minimize water production cost (WPC) using genetic algorithm (GA). A case study shows that the WPC can be decreased by 38.1% in comparison with the non-optimized VMD process. Meanwhile, a general guidance for reducing the WPC was also provided. The feed temperature should be adopted as high as possible, while the hollow fiber length cannot be too long to result in a decrease in water flux and an increase in pressure drop. The flow rate is recommended to take a lower bound value and the moderate degree of vacuum is preferable. This study indicates the importance of VMD system optimization to minimize water production cost.en_US
dc.description.sponsorshipNRF (Natl Research Foundation, S’pore)en_US
dc.language.isoenen_US
dc.relation.ispartofseriesDesalinationen_US
dc.rights© 2014 Elsevier B.V. This is the author created version of a work that has been peer reviewed and accepted for publication by Desalination, Elsevier B.V. It incorporates referee’s comments but changes resulting from the publishing process, such as copyediting, structural formatting, may not be reflected in this document. The published version is available at: [http://dx.doi.org/10.1016/j.desal.2014.02.005].en_US
dc.subjectDRNTU::Engineering::Environmental engineering::Water treatment
dc.titleNumerical modeling and optimization of vacuum membrane distillation module for low-cost water productionen_US
dc.typeJournal Article
dc.contributor.researchSingapore Membrane Technology Centreen_US
dc.contributor.schoolSchool of Civil and Environmental Engineeringen_US
dc.identifier.doihttp://dx.doi.org/10.1016/j.desal.2014.02.005
dc.description.versionAccepted versionen_US


Files in this item

Thumbnail
Thumbnail

This item appears in the following Collection(s)

Show simple item record