dc.contributor.authorXu, Xiaoyan
dc.contributor.authorWong, Terence Kin Shun
dc.contributor.authorSun, Xiao Wei
dc.contributor.editorRand, Barry P.*
dc.contributor.editorAdachi, Chihaya*
dc.contributor.editorCheyns, David*
dc.contributor.editorvan Elsbergen, Volker*
dc.date.accessioned2014-07-04T03:29:06Z
dc.date.available2014-07-04T03:29:06Z
dc.date.copyright2014en_US
dc.date.issued2014
dc.identifier.citationXu, X., Wong, T. K. S., & Sun, X. W. (2014). Enhancement of power conversion efficiency in solution processed organic photovoltaic devices by embedded plasmonic gold-silica core-shell nanorods. SPIE Proceedings, 9137, 91370Z-.en_US
dc.identifier.urihttp://hdl.handle.net/10220/20080
dc.description.abstractChemically synthesized gold-silica nanorods were incorporated into the active layer of solution processed organic photovoltaic devices to enhance the absorption of light by the surface plasmon resonance effect in metallic nanoparticles. Solution processed polymer:fullerene and small molecule:fullerene bulk heterojunction devices were studied. The polymer donors include regioregular poly(3-hexylthiophene) (P3HT) and low bandgap poly[2,6-(4,4-bis-(2-ethylhexyl)- 4N-cyclopenta[2,1-b:3,4-b’] dithiophene)-alt-4,7-(2,1,3-benzothiadiazole)] (PCPDTBT). For the small molecule device, 7,7'-(4,4-bis(2-ethylhexyl)-4H-silolo[3,2-b:4,5-b']-dithiophene-2,6-diyl)bis(6-fluoro-4-(5'-hexyl-[2,2'-bithiophen]-5-yl) benzo[c][1,2,5]thiadiazole) (p-DTS(FBTTh2)2) was used as the donor. The donors are blended with either [6,6]-phenyl- C61-butyric acid methyl ester (PC60BM) or [6,6]-phenyl-C71-butyric acid methyl ester (PC70BM). The gold-silica nanorods have an aspect ratio (length/diameter) of 3.2 and 2.3 and a shell thickness of ~10 nm. Prior to spin coating, the nanorods were added directly to the donor:acceptor blend solution in either chlorobenzene or dichlorobenzene at different weight percentage of the total donor:acceptor weight. The transverse and longitudinal surface plasmon resonance peaks of the gold-slica nanorods overlap with the absorption spectra of all three donor:acceptor blends to differing degrees. As a result, the power conversion efficiency of optimized plasmonic P3HT:PC60BM and PCPDTBT:PC70BM devices with conventional structure under AM1.5G illumination at 100mW/cm2 were increased by 9.3% (to 3.42%) and 20.8% (to 4.11%) respectively relative to the control device without nanorods. For the p-DTS(FBTTh2)2:PC70BM device, the relative improvement as compared to the control device was 24.2% (to 8.01%).en_US
dc.language.isoenen_US
dc.rights© 2014 SPIE. This paper was published in SPIE Proceedings and is made available as an electronic reprint (preprint) with permission of SPIE. The paper can be found at the following official DOI: http://dx.doi.org/10.1117/12.2051717.  One print or electronic copy may be made for personal use only. Systematic or multiple reproduction, distribution to multiple locations via electronic or other means, duplication of any material in this paper for a fee or for commercial purposes, or modification of the content of the paper is prohibited and is subject to penalties under law.en_US
dc.subjectDRNTU::Engineering::Electrical and electronic engineering::Power electronics
dc.titleEnhancement of power conversion efficiency in solution processed organic photovoltaic devices by embedded plasmonic gold-silica core-shell nanorodsen_US
dc.typeConference Paper
dc.contributor.conferenceOrganic Photonics VIen_US
dc.contributor.schoolSchool of Electrical and Electronic Engineeringen_US
dc.identifier.doihttp://dx.doi.org/10.1117/12.2051717
dc.description.versionPublished versionen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record