dc.contributor.authorQian, Kai
dc.contributor.authorLi, Bing
dc.date.accessioned2015-04-10T03:38:11Z
dc.date.available2015-04-10T03:38:11Z
dc.date.copyright2015en_US
dc.date.issued2015
dc.identifier.citationQian, K. & Li, B. (2015). Load-resisting mechanism to mitigate progressive collapse of flat slab structures. Magazine of concrete research, 67(7), 349-363.en_US
dc.identifier.urihttp://hdl.handle.net/10220/25353
dc.description.abstractFor reinforced concrete flat slab structures, column failure due to unexpected extreme loading may significantly increase the moment and shear force at adjacent slab–column connections, which can trigger punching shear failure at these connections and result in progressive collapse of flat slab structures. To determine the possible load-resisting mechanisms developed in flat slab structures in resisting progressive collapse, three multi-panel flat slab substructures are tested in this study. A flat slab substructure is tested as a control specimen. The remaining two specimens are strengthened by adding drop panels or post-installed shear bolts. Punching shear failure is observed in the control specimen and the specimen with post-installed shear bolts after reaching their yield loads. However, even the control specimen without any strengthening exhibited considerable post-failure resistance and deformation capacity mainly due to sufficient integrity reinforcement, which had been installed in the bottom of the slab. Test results indicated that drop panels not only increase the flexural resistance but also raise the punching shear resistance of the connections significantly. Thus, no obvious punching shear failure is observed in the specimen with drop panels. However, post-installed shear bolts can only increase the punching shear resistance. For post-failure behaviour, this is not very effective. The test results demonstrated that flexural failure dominates the performance of test specimens, as relatively low slab reinforcement ratio but high span/thickness ratio was designed.en_US
dc.format.extent15 p.en_US
dc.language.isoenen_US
dc.relation.ispartofseriesMagazine of concrete researchen_US
dc.rights© 2015 Thomas Telford Ltd. This paper was published in Magazine of Concrete Research and is made available as an electronic reprint (preprint) with permission of Thomas Telford Ltd. The paper can be found at the following official DOI: [http://dx.doi.org/10.1680/macr.14.00293].  One print or electronic copy may be made for personal use only. Systematic or multiple reproduction, distribution to multiple locations via electronic or other means, duplication of any material in this paper for a fee or for commercial purposes, or modification of the content of the paper is prohibited and is subject to penalties under law.en_US
dc.subjectDRNTU::Engineering::Civil engineering::Structures and design
dc.titleLoad-resisting mechanism to mitigate progressive collapse of flat slab structuresen_US
dc.typeJournal Article
dc.contributor.schoolSchool of Civil and Environmental Engineeringen_US
dc.identifier.doihttp://dx.doi.org/10.1680/macr.14.00293
dc.description.versionPublished versionen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record