dc.contributor.authorKyaw, Zabu
dc.contributor.authorJianxiong, Wang
dc.contributor.authorDev, Kapil
dc.contributor.authorTan, Swee Tiam
dc.contributor.authorJu, Zhengang
dc.contributor.authorZhang, Zi-Hui
dc.contributor.authorJi, Yun
dc.contributor.authorHasanov, Namig
dc.contributor.authorLiu, Wei
dc.contributor.authorSun, Xiao Wei
dc.contributor.authorDemir, Hilmi Volkan
dc.date.accessioned2015-09-04T04:01:58Z
dc.date.available2015-09-04T04:01:58Z
dc.date.copyright2013en_US
dc.date.issued2013
dc.identifier.citationKyaw, Z., Jianxiong, W., Dev, K., Tan, S. T., Ju, Z., Zhang, Z.-H., et al. (2013). Room-temperature larger-scale highly ordered nanorod imprints of ZnO film. Optics Express, 21(22), 26846-.en_US
dc.identifier.issn1094-4087en_US
dc.identifier.urihttp://hdl.handle.net/10220/38582
dc.description.abstractRoom-temperature large-scale highly ordered nanorod-patterned ZnO films directly integrated on III-nitride light-emitting diodes (LEDs) are proposed and demonstrated via low-cost modified nanoimprinting, avoiding a high-temperature process. with a 600 nm pitch on top of a critical 200 nm thick Imprinting ZnO nanorods of 200 nm in diameter and 200 nm in height continuous ZnO wetting layer, the light output power of the resulting integrated ZnO-nanorod-film/semi-transparent metal/GaN/InGaN LED shows a two-fold enhancement (100% light extraction efficiency improvement) at the injection current of 150 mA, in comparison with the conventional LED without the imprint film. The increased optical output is well explained by the enhanced light scattering and outcoupling of the ZnO-rod structures along with the wetting film, as verified by the numerical simulations. The wetting layer is found to be essential for better impedance matching. The current-voltage characteristics and electroluminescence measurements confirm that there is no noticeable change in the electrical or spectral properties of the final LEDs after ZnO-nanorod film integration. These results suggest that the low-cost high-quality large-scale ZnO-nanorod imprints hold great promise for superior LED light extraction.en_US
dc.description.sponsorshipASTAR (Agency for Sci., Tech. and Research, S’pore)
dc.language.isoenen_US
dc.relation.ispartofseriesOptics expressen_US
dc.rights© 2013 Optical Society of America. This is the author created version of a work that has been peer reviewed and accepted for publication by Optics express, Optical Society of America. It incorporates referee’s comments but changes resulting from the publishing process, such as copyediting, structural formatting, may not be reflected in this document. The published version is available at: [http://dx.doi.org/10.1364/OE.21.026846].en_US
dc.titleRoom-temperature larger-scale highly ordered nanorod imprints of ZnO filmen_US
dc.typeJournal Article
dc.contributor.schoolSchool of Electrical and Electronic Engineeringen_US
dc.contributor.schoolSchool of Physical and Mathematical Sciencesen_US
dc.identifier.doihttp://dx.doi.org/10.1364/OE.21.026846
dc.description.versionAccepted version


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record