dc.contributor.authorLembono, Teguh Santoso
dc.contributor.authorYuan, Qilong
dc.contributor.authorZou, Yuhua
dc.contributor.authorChen, I-Ming
dc.date.accessioned2015-10-01T04:04:01Z
dc.date.available2015-10-01T04:04:01Z
dc.date.copyright2015en_US
dc.date.issued2015
dc.identifier.citationLembono, T. S., Yuan, Q., Zou, Y., & Chen, I.-M. (2015). Automatic Robot Taping: System Integration, 2015 IEEE International Conference on Advanced Intelligent Mechatronics (AIM), July 7-11, Busan, Korea.en_US
dc.identifier.urihttp://hdl.handle.net/10220/38759
dc.description.abstractIndustrial robot arm has been used in a lot of applications, but most of them require manual teaching from the operator, or careful path-planning by experienced programmer. Offline programming is one of the solution for more sophisticated applications, but the 3D model of the workpiece should be provided, especially for applications such as painting, thermal spraying, etc. With the increasing availability of 3D scanner and cheap RGB-D camera such as Kinect (with its 3D model generation algorithm, Kinect Fusion), the 3D model of the object can be generated with lesser effort. This paper discusses the integration of scanning, path planning, and control of robot to achieve a complicated task: Automated Robot Taping. Kinect and 3D scanner Artec Eva were used to generate the 3D model, and a taping tool (attached to an industrial robot arm) was designed and manufactured. Based on the 3D model, a path planning algorithm was developed to generate the robot trajectory. To validate the system, some experiments have been conducted, and the automatic taping has been successfully done on the actual object. The application that is considered here is automatic taping, where a workpiece surface is to be covered by a masking tape, to be protected during plasma spraying. The overal framework, however, can be used for other applications such as painting, thermal spraying, etc.en_US
dc.language.isoenen_US
dc.rights© 2015 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works. The published version is available at: [http://dx.doi.org/10.1109/AIM.2015.7222633].en_US
dc.subjectMechanical and Aerospace Engineering
dc.titleAutomatic Robot Taping: System Integrationen_US
dc.typeConference Paper
dc.contributor.conference2015 IEEE International Conference on Advanced Intelligent Mechatronics (AIM)en_US
dc.contributor.schoolSchool of Mechanical and Aerospace Engineeringen_US
dc.identifier.doihttp://dx.doi.org/10.1109/AIM.2015.7222633
dc.description.versionAccepted versionen_US
dc.identifier.rims186232


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record