dc.contributor.authorGuan, Yingchun
dc.contributor.authorZhou, Wei
dc.contributor.authorLi, Zhongli
dc.contributor.authorZheng, Hongyu
dc.identifier.citationGuan, Y., Zhou, W., Li, Z., & Zheng, H. (2014). Boiling effect in crater development on magnesium surface induced by laser melting. Surface and Coatings Technology, 252, 168-172.en_US
dc.description.abstractThis paper demonstrated that micron-craters could be fabricated on both magnesium and Mg alloy surfaces by nanosecond pulsed laser processing. Experimental results revealed that the craters with broad distribution of dimension occurred after laser melting. Morphological difference at the irradiated surface between Mg and Mg alloy indicated that thermal properties, alloying elements and microstructure of irradiated materials were key factors responsible for crater formation. It was proposed that the craters were formed by combined effect of explosive volume boiling and generation of cavitation bubbles during laser melting. Thermal effect of nanosecond pulsed laser processing on Mg and Mg alloy as well as progressive formation of laser-induced crater was further discussed. Such phenomenon extended potential applications of Mg materials, which offered the potential for developing new types of Mg-based biomedical devices.en_US
dc.description.sponsorshipASTAR (Agency for Sci., Tech. and Research, S’pore)en_US
dc.format.extent10 p.en_US
dc.relation.ispartofseriesSurface and Coatings Technologyen_US
dc.rights© 2014 Elsevier B.V. This is the author created version of a work that has been peer reviewed and accepted for publication by Surface and Coatings Technology, Elsevier B.V. It incorporates referee’s comments but changes resulting from the publishing process, such as copyediting, structural formatting, may not be reflected in this document. The published version is available at: [http://dx.doi.org/10.1016/j.surfcoat.2014.05.002].en_US
dc.subjectNanosecond pulse laseren_US
dc.subjectMg and Mg alloy
dc.subjectBoiling and bubble
dc.subjectThermal effect
dc.titleBoiling effect in crater development on magnesium surface induced by laser meltingen_US
dc.typeJournal Article
dc.contributor.researchSingapore Institute of Manufacturing Technologyen_US
dc.contributor.schoolSchool of Mechanical and Aerospace Engineeringen_US
dc.description.versionAccepted versionen_US

Files in this item


This item appears in the following Collection(s)

Show simple item record