dc.contributor.authorKhadka, Indira
dc.contributor.authorCastagne, Sylvie
dc.contributor.authorWang, Zhongke
dc.contributor.authorZheng, Hongyu
dc.date.accessioned2016-07-12T01:55:42Z
dc.date.available2016-07-12T01:55:42Z
dc.date.issued2016
dc.identifier.citationKhadka, I., Castagne, S., Wang, Z., & Zheng, H. (2016). Surface structure formation in WE54 Mg alloy subjected to ultrafast laser texturing. Journal of Laser Applications, 28(2), 022504-.en_US
dc.identifier.issn1042-346Xen_US
dc.identifier.urihttp://hdl.handle.net/10220/40910
dc.description.abstractPico- and femtosecond lasersurfacestructuring of WE54 Mg alloy was investigated in this paper. In particular, the effective response of rare earth elements during laser structuring and the surface structure formation mechanisms were studied. A 10 W picosecond laser, having a wavelength of 1064 nm, and a 1.5 W femtosecond laser, having a wavelength of 795 nm, were used to irradiate WE54 surface to change the surface morphology. A number of pulses varying from 100 to 1500 were applied to create a crater at single and multiple points on the WE54 alloy surface in an air medium. Taylor Hobson profilometer and energy dispersive x-ray spectroscopy (EDS) techniques were employed in order to analyze the modification in surface morphology and chemical composition, respectively. A crater depth around 1.1 μm was measured by the profilometer. It was observed that a compound of yttrium and neodymium was formed during the process of rapid thermalization, which is investigated by x-ray diffraction. The surface portion containing yttrium was converted into a white crystal-like structure as observed by optical and scanning electron microscope (SEM). The white color compound of rare earth element is turned into gray, then dark, and is finally ablated from the surface with increasing scanning number and number of laser pulses. The change in color represents the change in optical properties of WE54. SEM analysis also revealed that no cracks were present on the laser structuredsurface; hence, stress effect on the surface can be neglected. Explosive vaporization of the substrate was observed in pico- and femtosecond laserstructuring. The investigation on ultrafast laserstructuring suggests that the surface properties created by laser structuring of WE54 can be controlled if proper laser processing is applied.en_US
dc.format.extent6 p.en_US
dc.language.isoenen_US
dc.relation.ispartofseriesJournal of Laser Applicationsen_US
dc.rights© 2016 Laser Institute of America. This paper was published in Journal of Laser Applications and is made available as an electronic reprint (preprint) with permission of Laser Institute of America. The published version is available at: [http://dx.doi.org/10.2351/1.4944447]. One print or electronic copy may be made for personal use only. Systematic or multiple reproduction, distribution to multiple locations via electronic or other means, duplication of any material in this paper for a fee or for commercial purposes, or modification of the content of the paper is prohibited and is subject to penalties under law.en_US
dc.subjectlaser texturingen_US
dc.subjectWE54 alloyen_US
dc.titleSurface structure formation in WE54 Mg alloy subjected to ultrafast laser texturingen_US
dc.typeJournal Article
dc.contributor.researchSingapore Institute of Manufacturing Technologyen_US
dc.contributor.schoolSchool of Mechanical and Aerospace Engineeringen_US
dc.identifier.doihttp://dx.doi.org/10.2351/1.4944447
dc.description.versionPublished versionen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record