dc.contributor.authorLie, Seng Tjhen
dc.contributor.authorLi, Tao
dc.contributor.authorShao, Y. B.
dc.identifier.citationLie, S. T., Li, T., & Shao, Y. B. (2016). Stress Intensity Factors of Tubular T/Y-Joints Subjected to Three Basic Loading. Advanced Steel Construction, 12(2), 109-133.en_US
dc.description.abstractThis paper describes the determination of stress intensity factors (SIFs) of a 3D surface crack in acircular hollow section (CHS) T/Y-joint subjected to three basic loading. In order to achieve the main objective, anautomatic finite element (FE) mesh generator is designed whereby the mesh density and element type of the CrackTube zone can be controlled by the users. Extensive tests are carried out to check the accuracy and to test theconvergence of the mesh models. It is found that the generated mesh models are both accurate and robust.Subsequently, a total of 246 cracked CHS T/Y-joints subjected to axial loading; in-plane bending and out-of-planebending are analysed, and the influencing parameters β, γ, τ, θ, a/t0 and c/a on the SIFs of a 3D surface crack areinvestigated in this study. The SIFs at the deepest point of a 3D surface crack are also determined using an indirectmethod incorporated in BS7910. It is found that the later underestimates the SIFs by as much as -36.9% under axialload for crack located at the crown and -32.9% under out-of-plane bending for crack located at the saddle,respectively. Hence, the indirect method is found to be unsafe in estimating the SIFs of a 3D surface crack in CHST/Y-joints under certain loading conditions and crack location.en_US
dc.format.extent25 p.en_US
dc.relation.ispartofseriesAdvanced Steel Constructionen_US
dc.rights© 2015 Hong Kong Institute of Steel Construction Limited. This paper was published in Advanced Steel Construction and is made available as an electronic reprint (preprint) with permission of Hong Kong Institute of Steel Construction Limited. The published version is available at: [http://dx.doi.org/10.18057/IJASC.2016.12.2.3]. One print or electronic copy may be made for personal use only. Systematic or multiple reproduction, distribution to multiple locations via electronic or other means, duplication of any material in this paper for a fee or for commercial purposes, or modification of the content of the paper is prohibited and is subject to penalties under law.en_US
dc.subjectStress intensity factoren_US
dc.subjectTubular T/Y-jointen_US
dc.titleStress Intensity Factors of Tubular T/Y-Joints Subjected to Three Basic Loadingen_US
dc.typeJournal Article
dc.contributor.schoolSchool of Civil and Environmental Engineeringen_US
dc.description.versionPublished versionen_US

Files in this item


This item appears in the following Collection(s)

Show simple item record