dc.contributor.authorChansri, Natthavika
dc.contributor.authorJanokul, Kittiya
dc.contributor.authorThamnitatsan, Natsima
dc.contributor.authorKoomsap, Pisut
dc.date.accessioned2016-12-01T04:54:53Z
dc.date.available2016-12-01T04:54:53Z
dc.date.issued2014
dc.identifier.citationChansri, N., Janokul, K., Thamnitatsan, N., & Koomsap, P. (2014). Experimental Study on Support Material Composition for Selective Vacuum Manufacturing RP Technique. Proceedings of the 1st International Conference on Progress in Additive Manufacturing (Pro-AM 2014), 127-132.en_US
dc.identifier.urihttp://hdl.handle.net/10220/41661
dc.description.abstractThis paper presents a study on the support material compositions for selective vacuum manufacturing, a rapid prototyping technique that creates a physical prototype layer by layer with two conventional manufacturing processes: sand casting and material sintering. Experiments were conducted to identify the amount of cornstarch, reported to be an appropriate binder, mixed in the two types of support material: salt and silica sand. The experimental results recommended the different amount of cornstarch to the two types of the support material.en_US
dc.format.extent6 p.en_US
dc.language.isoenen_US
dc.rights© 2014 by Research Publishing Services.en_US
dc.titleExperimental Study on Support Material Composition for Selective Vacuum Manufacturing RP Techniqueen_US
dc.typeConference Paper
dc.contributor.conferenceProceedings of the 1st International Conference on Progress in Additive Manufacturing (Pro-AM 2014)en_US
dc.contributor.researchSingapore Centre for 3D Printingen_US
dc.identifier.doihttp://dx.doi.org/10.3850/978-981-09-0446-3_017
dc.description.versionPublished versionen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record