dc.contributor.authorZhu, Ziming
dc.contributor.authorChen, Xindu
dc.contributor.authorZheng, Junwei
dc.contributor.authorLiang, Feng
dc.contributor.authorLi, Minghao
dc.contributor.authorWang, Han
dc.identifier.citationZhu, Z., Chen, X., Zheng, J., Liang, F., Li, M., & Wang, H. (2014). Fabricate Wavy Micro/Nano Fiber via Auxiliary Electrodes. Proceedings of the 1st International Conference on Progress in Additive Manufacturing (Pro-AM 2014), 352-357.en_US
dc.description.abstractWavy micro/nano fiber is a common phenomenon in traditional electrospinning caused by bending instability. However, using bending instability to fabricate wavy fibers is hard to control the wavelength and amplitude of the wavy fibers. Auxiliary electrodes were developed to control the morphology of the wavy fibers in this paper, when a 4 wt% Poly(ethylene oxide)(PEO) solution was electrospun at 1KV applied voltage in near-field electrospinning, and the collector at relatively low speed, AC current power supplied to auxiliary electrodes, and the amplitude of wavy was increased as increasing the AC current power voltage supplied to the auxiliary electrodes, and the frequencies of the wavy fibers was the same as the frequencies of the AC current power. Therefore, AC current power supplied to auxiliary electrodes can be used to control wavy fibers fabrication.en_US
dc.format.extent6 p.en_US
dc.rights© 2014 by Research Publishing Services.en_US
dc.titleFabricate Wavy Micro/Nano Fiber via Auxiliary Electrodesen_US
dc.typeConference Paper
dc.contributor.conferenceProceedings of the 1st International Conference on Progress in Additive Manufacturing (Pro-AM 2014)en_US
dc.contributor.researchSingapore Centre for 3D Printingen_US
dc.description.versionPublished versionen_US

Files in this item


This item appears in the following Collection(s)

Show simple item record