Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/84568
Title: The Effect Of Laser Power And Scanning Speed On The Density Of Selective Laser Melting Fabricated AL-CNT Composites
Authors: Du, Zhenglin
Tan, Ming Jen
Guo, Jun Feng
Chua, Chee Kai
Lim, Jun Jie Dalton
Keywords: Selective laser melting,
Carbon Nanotubes
Issue Date: 2016
Source: Du, Z., Tan, M. J., Guo, J. F., Chua, C. K., & Lim, J. J. D. (2016). The Effect Of Laser Power And Scanning Speed On The Density Of Selective Laser Melting Fabricated AL-CNT Composites. Proceedings of the 2nd International Conference on Progress in Additive Manufacturing (Pro-AM 2016), 488-493.
Abstract: AlSi10Mg reinforced with carbon nanotubes were fabricated using selective laser melting manufacturing process. The influence of laser power and scanning speed on the densification behavior and microhardness were studied. Near fully dense nanocomposite parts with 97% theoretical density were achieved with increasing energy density. Microhardness was observed to slightly decrease as energy density increases. This could be attributed to the increase in grain size as energy density increases.
URI: https://hdl.handle.net/10356/84568
http://hdl.handle.net/10220/41859
Rights: © 2016 by Pro-AM 2016 Organizers. Published by Research Publishing, Singapore
metadata.item.grantfulltext: open
metadata.item.fulltext: With Fulltext
Appears in Collections:MAE Conference Papers
Pro-AM Conference Papers
SIMTech Conference Papers

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.