dc.contributor.authorQian, Kai
dc.contributor.authorLi, Bing
dc.contributor.authorLiu, Yi
dc.date.accessioned2017-07-25T09:18:44Z
dc.date.available2017-07-25T09:18:44Z
dc.date.issued2016
dc.identifier.citationQian, K., Li, B., & Liu, Y. (2017). Experimental and analytical study on load paths of RC squat walls with openings. Magazine of Concrete Research, 69(1), 1-23.en_US
dc.identifier.issn0024-9831en_US
dc.identifier.urihttp://hdl.handle.net/10220/43443
dc.description.abstractTwo series of experimental tests on reinforced concrete (RC) squat walls with irregular openings were analysed. The experimental evidence indicated that flanges significantly affect the failure modes, initial stiffness, ultimate strength and deformation capacity. Given the complexity of the stress distribution in walls with irregular openings, strut-and-tie models are generally used in design and analysis to explicitly demonstrate the shear force transfer and load distribution paths. A comparison of experimental data with analytical results from the existing strut-and-tie model indicated that the latter may underestimate the ultimate strength by 51%. Although the strut-and-tie model is a lower-bound solution, the underestimation of 51% is still very large and may lead to unfavourable shear failure. An improved strut-and-tie model was thus developed, based on test observations. The improved strut-and-tie model can provide a more accurate prediction for the ultimate strength of walls with irregular openings. Based on the model, design recommendations and suggestions for reinforcement details in RC walls with irregular openings are also presented.en_US
dc.format.extent23 p.en_US
dc.language.isoenen_US
dc.relation.ispartofseriesMagazine of Concrete Researchen_US
dc.rights© 2016 Thomas Telford (ICE Publishing). This paper was published in Magazine of Concrete Research and is made available as an electronic reprint (preprint) with permission of Thomas Telford (ICE Publishing). The published version is available at: [http://dx.doi.org/10.1680/jmacr.15.00300]. One print or electronic copy may be made for personal use only. Systematic or multiple reproduction, distribution to multiple locations via electronic or other means, duplication of any material in this paper for a fee or for commercial purposes, or modification of the content of the paper is prohibited and is subject to penalties under law.en_US
dc.subjectStructural analysisen_US
dc.subjectStructural designen_US
dc.titleExperimental and analytical study on load paths of RC squat walls with openingsen_US
dc.typeJournal Article
dc.contributor.schoolSchool of Civil and Environmental Engineeringen_US
dc.identifier.doihttp://dx.doi.org/10.1680/jmacr.15.00300
dc.description.versionPublished versionen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record