dc.contributor.authorSriphutkiat, Yannapol
dc.contributor.authorKasetsirikul, Surasak
dc.contributor.authorZhou, Yufeng
dc.date.accessioned2018-07-20T02:37:21Z
dc.date.available2018-07-20T02:37:21Z
dc.date.issued2018
dc.identifier.citationSriphutkiat, Y., Kasetsirikul, S., & Zhou, Y. (2017). Formation of cell spheroids using Standing Surface Acoustic Wave (SSAW). International Journal of Bioprinting, 4(1), 130-.en_US
dc.identifier.urihttp://hdl.handle.net/10220/45148
dc.description.abstract3D bioprinting becomes one of the popular approaches in the tissue engineering. In this emerging application, bioink is crucial for fabrication and functionality of constructed tissue. The use of cell spheroids as bioink can enhance the cell-cell interaction and subsequently the growth and differentiation of cells in the 3D printed construct with the minimal amount of other biomaterials. However, the conventional methods of preparing the cell spheroids have several limitations, such as long culture time, low-throughput, and medium modification. In this study, the formation of cell spheroids by SSAW was evaluated both numerically and experimentally in order to overcome the aforementioned limitations. The effects of excitation frequencies on the cell accumulation time, diameter of formed cell spheroids, and subsequently, the growth and viability of cell spheroids in the culture media over time were studied. Using the high-frequency (24.9 MHz) excitation, cell accumulation time to the pressure nodes could be reduced in comparison to that of the low-frequency (10.4 MHz) excitation, but in a smaller spheroid size. SSAW excitation at both frequencies does not affect the cell viabilities up to 7 days, > 90% with no statistical difference compared with the control group. In summary, SSAW can effectively prepare the cell spheroids as bioink for the future 3D bioprinting and various biotechnology applications (e.g., pharmaceutical drug screening and tissue engineering).en_US
dc.description.sponsorshipASTAR (Agency for Sci., Tech. and Research, S’pore)en_US
dc.description.sponsorshipMOE (Min. of Education, S’pore)en_US
dc.format.extent12 p.en_US
dc.language.isoenen_US
dc.relation.ispartofseriesInternational Journal of Bioprintingen_US
dc.rights© 2018 The Author(s) (International Journal of Bioprinting) (published by Whioce Publishing Pte Ltd). This is an Open Access article distributed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), permitting all non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.en_US
dc.subjectStanding Surface Acoustic Wave (SSAW)en_US
dc.subjectCell Spheroiden_US
dc.titleFormation of cell spheroids using Standing Surface Acoustic Wave (SSAW)en_US
dc.typeJournal Article
dc.contributor.researchSingapore Centre for 3D Printingen_US
dc.contributor.schoolSchool of Mechanical and Aerospace Engineeringen_US
dc.identifier.doihttp://dx.doi.org/10.18063/ijb.v4i1.130
dc.description.versionPublished versionen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record