Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/88293
Title: Additive manufacturing and high performance applications
Authors: Lindgren, Lars-Erik
Lundbӓck, Andreas
Keywords: Simulations
Additive Manufacturing
DRNTU::Engineering::Mechanical engineering::Prototyping
Issue Date: 2018
Source: Lindgren, L.-E., & Lundbäck, A. (2018). Additive manufacturing and high-performance applications. Proceedings of the 3rd International Conference on Progress in Additive Manufacturing (Pro-AM 2018), 214-219. doi:10.25341/D4JC76
Abstract: The requirement on life and robustness for aero-engine components poses obstacles to additive manufacturing. It is expected that increasing knowledge about the process and thereby its development together with adaption of existing alloys may improve this state. Simulations can contribute to understanding as well as be used in the design of process and components in order to reduce residual deformations and stresses as well as defects. Models for the latter are still not well established. The paper describes various existing approaches and also on-going developments at Luleå University of Technology that enable better descriptions in the near weld region for crack initiation.
URI: https://hdl.handle.net/10356/88293
http://hdl.handle.net/10220/45769
DOI: https://doi.org/10.25341/D4JC76
Rights: © 2018 Nanyang Technological University. Published by Nanyang Technological University, Singapore.
metadata.item.grantfulltext: open
metadata.item.fulltext: With Fulltext
Appears in Collections:Pro-AM Conference Papers

Files in This Item:
File Description SizeFormat 
ADDITIVE MANUFACTURING AND HIGH PERFORMANCE.pdf708.8 kBAdobe PDFThumbnail
View/Open

Google ScholarTM

Check

Altmetric

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.