dc.contributor.authorWang, Jing Jing
dc.contributor.authorZhang, Meng
dc.contributor.authorTan, Xipeng
dc.contributor.authorJing, Wei
dc.contributor.authorLiu, Er Jia
dc.contributor.authorTor, Shu Beng
dc.contributor.authorLi, Hua
dc.date.accessioned2018-09-11T07:07:00Z
dc.date.available2018-09-11T07:07:00Z
dc.date.issued2018
dc.identifier.citationWang, J. J., Zhang, M., Tan, X., Jing, W., Liu, E. J., Tor, S. B., & Li, H. (2018). Impact and fatigue characteristics of additively manufactured steel materials : a review. Proceedings of the 3rd International Conference on Progress in Additive Manufacturing (Pro-AM 2018), 487-492. doi:10.25341/D4T881en_US
dc.identifier.urihttp://hdl.handle.net/10220/45950
dc.description.abstractGood mechanical properties are essential for steel parts additively manufactured (AM), especially, for load bearing components. For example, a proper impact toughness is necessary for structural steels used in marine and offshore (M & O) industry to prevent low temperature brittleness of the steels while a high fatigue strength warrant a long service span of the steels. Although the works on charpy and fatigue characteristics of AM parts are lacking, some related studies on their fracture behavior have been reported, which cover a range of steels including 316L stainless steel, maraging steel, 17-4 PH stainless steel, H13 tool steel, etc. This paper critically summaries the reported works and discusses a future direction for the study of the impact and fatigue characteristics of AM steels.en_US
dc.description.sponsorshipNRF (Natl Research Foundation, S’pore)en_US
dc.format.extent6 p.en_US
dc.language.isoenen_US
dc.rights© 2018 Nanyang Technological University. Published by Nanyang Technological University, Singapore.en_US
dc.subjectSteelen_US
dc.subjectAdditive Manufacturingen_US
dc.subjectDRNTU::Engineering::Mechanical engineering::Prototypingen_US
dc.titleImpact and fatigue characteristics of additively manufactured steel materials : a reviewen_US
dc.typeConference Paper
dc.contributor.conferenceProceedings of the 3rd International Conference on Progress in Additive Manufacturing (Pro-AM 2018)en_US
dc.contributor.researchSingapore Centre for 3D Printingen_US
dc.contributor.schoolSchool of Mechanical and Aerospace Engineeringen_US
dc.identifier.doihttps://doi.org/10.25341/D4T881
dc.description.versionPublished versionen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record