Please use this identifier to cite or link to this item:
|Title:||Development of a low cost laser scanning system for gear repair using additive manufacturing technologies||Authors:||Pang, Wee Ching
|Issue Date:||2018||Source:||Pang, W. C., Ahmad K., & Seet, G. (2018). Development of a low cost laser scanning system for gear repair using additive manufacturing technologies. Proceedings of the 3rd International Conference on Progress in Additive Manufacturing (Pro-AM 2018), 583-588. doi:10.25341/D4ZK57||Abstract:||Measurement and dimensioning is the primary purpose of the pre-processing stage in many generalized strategies for parts repair/remanufacturing. This work reports on a low cost system for the dimensioning of worn out parts. The system consists of both mechanical element made up of a Hokuyo URG-04LX-UG01 2D scanning laser rangefinder and a rotating mechanism actuated by a Dynamixel MX-28 servomotor and consolidated software element integrating motion control and point cloud generation. A case study involving the scanning of a rack is reported.||URI:||https://hdl.handle.net/10356/88712
|DOI:||https://doi.org/10.25341/D4ZK57||Rights:||© 2018 Nanyang Technological University. Published by Nanyang Technological University, Singapore.||Fulltext Permission:||open||Fulltext Availability:||With Fulltext|
|Appears in Collections:||Pro-AM Conference Papers|
Files in This Item:
|DEVELOPMENT OF A LOW COST LASER SCANNING SYSTEM FOR.pdf||477.71 kB||Adobe PDF|
Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.