dc.contributor.authorSugavaneswaran, M.
dc.contributor.authorNayak, Utkarsh
dc.contributor.authorSaha, Somnath
dc.contributor.authorNair, Nitheeshm M.
dc.contributor.authorParasuraman, Swaminathan
dc.contributor.authorKumar, Prasanna
dc.date.accessioned2018-09-11T07:34:23Z
dc.date.available2018-09-11T07:34:23Z
dc.date.issued2018
dc.identifier.citationSugavaneswaran, M., Nayak, U., Saha, S., Nair, N. M., Parasuraman, S., & Kumar, P. (2018). Additive manufacturing of fractal antenna for electronics applications. Proceedings of the 3rd International Conference on Progress in Additive Manufacturing (Pro-AM 2018), 644-649. doi:doi.org/10.25341/D49W29en_US
dc.identifier.urihttp://hdl.handle.net/10220/45952
dc.description.abstractModern electronics device requires miniaturization and advanced functionality. Fractal antenna is one of the current research for such requirement. A fractal antenna is an antenna with fragmented geometry that has the characteristics of self similarity, which means, each part of the geometry is a smaller version of the original geometry. This self-similarity will increase the perimeter of antenna geometry that can receive or transmit electromagnetic radiation. Compare to conventional antenna, fractal antenna take less area due to the many contours of the shape while keeping high radiation efficiency and multi bandwidth. However, fabrication of fractal geometry is a difficult task due to the complexity associated with it. In this work, the Additive manufacturing process is proposed for the fabrication of these complex shape fractal antennas. Fabricated fractal geometry is tested on the VNA network to measure the reflection and transmission. From the experimentation, it is observed that the reflective coefficient of additive manufactured fractal antenna is -16.87 which is in the acceptable range for the commercial electronic device. In addition, experimental result is also validated by simulation using electromagnetic simulation software CST studio.en_US
dc.format.extent6 p.en_US
dc.language.isoenen_US
dc.rights© 2018 Nanyang Technological University. Published by Nanyang Technological University, Singapore.en_US
dc.subjectAdditive Manufacturing (AM)en_US
dc.subjectAntenna Simulationen_US
dc.subjectDRNTU::Engineering::Mechanical engineering::Prototypingen_US
dc.titleAdditive manufacturing of fractal antenna for electronics applicationsen_US
dc.typeConference Paper
dc.contributor.conferenceProceedings of the 3rd International Conference on Progress in Additive Manufacturing (Pro-AM 2018)en_US
dc.contributor.researchSingapore Centre for 3D Printingen_US
dc.contributor.schoolSchool of Mechanical and Aerospace Engineeringen_US
dc.identifier.doihttps://doi.org/10.25341/D49W29
dc.description.versionPublished versionen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record