dc.contributor.authorFoo, Say Wei
dc.contributor.authorLin, Yu
dc.date.accessioned2009-06-22T02:39:27Z
dc.date.available2009-06-22T02:39:27Z
dc.date.copyright1999en_US
dc.date.issued1999
dc.identifier.citationFoo, S. W., & Lin, Y. (1999). Hybrid method of tolerance design. IEEE International Conference on Electronics, Circuits and Systems (pp. 557-560) Singapore: National University of Singapore.en_US
dc.identifier.urihttp://hdl.handle.net/10220/4634
dc.description.abstractA new method of tolerance design, which we call the Hybrid method that accelerates the attainment of optimal design center, is proposed. The method combines geometry search with statistical process. At the start of the process, the region of acceptability is estimated using boundary search method. A new tolerance region that covers as much of the estimated region of acceptability is determined. The Centers-of- Gravity (CoG) method is then applied to find a new design center. The tolerance region is then progressively reduced to target size while the process of locating the optimal design centers continues. Compared to the popular CoG method, the speed of convergence of the Hybrid method is much faster while the additional computational load is insignificant.en_US
dc.format.extent4 p.en_US
dc.language.isoenen_US
dc.rights© IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE. This material is presented to ensure timely dissemination of scholarly and technical work. Copyright and all rights therein are retained by authors or by other copyright holders. All persons copying this information are expected to adhere to the terms and constraints invoked by each author's copyright. In most cases, these works may not be reposted without the explicit permission of the copyright holder. This material is presented to ensure timely dissemination of scholarly and technical work. Copyright and all rights therein are retained by authors or by other copyright holders. All persons copying this information are expected to adhere to the terms and constraints invoked by each author's copyright. In most cases, these works may not be reposted without the explicit permission of the copyright holder. http://www.ieee.org/portal/siteen_US
dc.subjectDRNTU::Engineering::Electrical and electronic engineering::Electronic circuits
dc.titleHybrid method of tolerance designen_US
dc.typeConference Paper
dc.contributor.conferenceIEEE International Conference on Electronics, Circuits and Systems (6th : 1999 : Pafos, Cyprus)en_US
dc.contributor.schoolSchool of Electrical and Electronic Engineeringen_US
dc.identifier.doihttp://dx.doi.org/10.1109/ICECS.1999.812346
dc.description.versionPublished versionen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record