dc.contributor.authorGanapathi, A. S.
dc.contributor.authorMaheshwari, Muneesh
dc.contributor.authorJoshi, Sunil Chandrakant
dc.contributor.authorChen, Zhong
dc.contributor.authorAsundi, Anand Krishna
dc.contributor.authorTjin, Swee Chuan
dc.contributor.editorQuan, Chenggen*
dc.contributor.editorQian, Kemao*
dc.contributor.editorAsundi, Anand*
dc.contributor.editorChau, Fook Siong*
dc.date.accessioned2018-12-13T08:45:35Z
dc.date.available2018-12-13T08:45:35Z
dc.date.issued2015
dc.identifier.citationGanapathi, A. S., Maheshwari, M., Joshi, S. C., Chen, Z., Asundi, A., & Tjin, S. C. (2015). Fibre Bragg grating sensors for in-situ measurement of resin pressure in curing composites. Proceedings of SPIE - International Conference on Experimental Mechanics 2014, 9302, 93021T-. doi:10.1117/12.2084783en_US
dc.identifier.urihttp://hdl.handle.net/10220/46958
dc.description.abstractA fibre optic sensor was developed for in-situ pressure measurement based on the principle of differential pressure in liquids. This sensor system is very simple and consists of fibre Bragg grating (FBG) done on a fibre with core diameter of 9 μm. A calibration study was carried out with a water column and the pressure sensitivity was found to be 1.636 × 10-2MPa-1. The results show that response of FBG to the rise of water level is linear and agrees well with the theoretical results. The reliability of the sensors is confirmed by repeating the measurements for three times. The sensor is useful in applications that involve in-situ resin pressure measurement in manufacturing of laminated composite materials.en_US
dc.format.extent6 p.en_US
dc.language.isoenen_US
dc.rights© 2015 Society of Photo-optical Instrumentation Engineers (SPIE). This paper was published in Proceedings of SPIE - International Conference on Experimental Mechanics 2014 and is made available as an electronic reprint (preprint) with permission of Society of Photo-optical Instrumentation Engineers (SPIE). The published version is available at: [http://dx.doi.org/10.1117/12.2084783]. One print or electronic copy may be made for personal use only. Systematic or multiple reproduction, distribution to multiple locations via electronic or other means, duplication of any material in this paper for a fee or for commercial purposes, or modification of the content of the paper is prohibited and is subject to penalties under law.en_US
dc.subjectFBGen_US
dc.subjectSensoren_US
dc.subjectDRNTU::Engineering::Mechanical engineeringen_US
dc.titleFibre Bragg grating sensors for in-situ measurement of resin pressure in curing compositesen_US
dc.typeConference Paper
dc.contributor.conferenceProceedings of SPIE - International Conference on Experimental Mechanics 2014en_US
dc.contributor.schoolSchool of Electrical and Electronic Engineeringen_US
dc.contributor.schoolSchool of Materials Science and Engineeringen_US
dc.contributor.schoolSchool of Mechanical and Aerospace Engineeringen_US
dc.identifier.doihttp://dx.doi.org/10.1117/12.2084783
dc.description.versionPublished versionen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record