Please use this identifier to cite or link to this item:
https://hdl.handle.net/10356/81416
Title: | Empirical models to predict rheological properties of fiber reinforced cementitious composites for 3D printing | Authors: | Weng, Yiwei Lu, Bing Li, Mingyang Liu, Zhixin Tan, Ming Jen Qian, Shunzhi |
Keywords: | Engineering::Mechanical engineering Rheological Properties Thixotropy |
Issue Date: | 2018 | Source: | Weng, Y., Lu, B., Li, M., Liu, Z., Tan, M. J., & Qian, S. (2018). Empirical models to predict rheological properties of fiber reinforced cementitious composites for 3D printing. Construction and Building Materials, 189676-685. doi:10.1016/j.conbuildmat.2018.09.039 | Series/Report no.: | Construction and Building Materials | Abstract: | 3D printable construction materials need to be conveyed through a delivery system whilst possess certain flow resistance to ensure materials can sustain the weight of subsequent layers. To meet these requirements, material rheological properties should be optimized. In this study, factorial design was adopted to evaluate the influences of five variables (water-to-binder ratio, sand-to-binder ratio, fly ash-to-cement ratio, silica fume-to-cement ratio, and dosage of fiber) on material rheological properties (flow resistance, torque viscosity and thixotropy). Empirical models were established to predict rheological properties and were verified by experiment. Results imply that the increment of the dosage of fiber boosts all the rheological parameters, which are declined with the increment of water-to-binder ratio. Torque viscosity raises while flow resistance and thixotropy are decreased with the rise of fly ash-to-cement ratio. Conversely, the influence of silica fume-to-cement ratio shows an opposite trend on rheological properties as compared to that of fly ash-to-cement ratio. Flow resistance and torque viscosity are improved whilst thixotropy is declined if sand-to-binder ratio increases. Different formulations were adopted in printing test for verification and demonstration purpose via a robotic arm printing system in the end. | URI: | https://hdl.handle.net/10356/81416 http://hdl.handle.net/10220/50379 |
ISSN: | 0950-0618 | DOI: | 10.1016/j.conbuildmat.2018.09.039 | Schools: | School of Civil and Environmental Engineering School of Mechanical and Aerospace Engineering |
Research Centres: | Singapore Centre for 3D Printing | Rights: | © 2018 Elsevier. All rights reserved. This paper was published in Construction and Building Materials and is made available with permission of Elsevier. | Fulltext Permission: | open | Fulltext Availability: | With Fulltext |
Appears in Collections: | CEE Journal Articles MAE Journal Articles SC3DP Journal Articles |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
Empirical models to predict rheological properties of fiber reinforced.pdf | 1.17 MB | Adobe PDF | View/Open |
SCOPUSTM
Citations
5
75
Updated on Mar 28, 2024
Web of ScienceTM
Citations
5
60
Updated on Oct 25, 2023
Page view(s) 50
475
Updated on Mar 28, 2024
Download(s) 20
313
Updated on Mar 28, 2024
Google ScholarTM
Check
Altmetric
Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.