Please use this identifier to cite or link to this item:
|Title:||Development of high performance nanofibrous composite membranes by optimizing polydimethylsiloxane architectures for phenol transport||Authors:||Jin, Meng-Yi
|Issue Date:||2017||Source:||Jin, M.-Y., Liao, Y., Tan, C.-H., & Wang, R. (2018). Development of high performance nanofibrous composite membranes by optimizing polydimethylsiloxane architectures for phenol transport. Journal of Membrane Science, 549, 638-648. doi:10.1016/j.memsci.2017.10.051||Series/Report no.:||Journal of Membrane Science||Abstract:||Phenol removal and recovery from wastewaters are highly demanded in industries due to its high toxicity and industrial importance. It can transport through the silicon-based rubber polydimethylsiloxane (PDMS) via the solution-diffusion mechanism. To improve the phenol removal efficiency in extractive processes, dense PDMS membranes with different macromolecular structures have been developed and evaluated in this work. The condensation-cured PDMS membranes (PA) with network architecture exhibited higher phenol partition coefficients (K) than the hydrosilylation-cured PDMS membranes with linear and branch architectures. This was attributed to the four-armed quaternary-siloxy linkages formed in the three-dimensional network structure, increasing the free volume for phenol passage and hydrogen bonding between phenol and PDMS matrix. The K of PA was further enhanced by optimizing the PDMS precursor chain length and cross-linker amount, and the corresponding membrane mechanical properties and phenol overall mass transfer coefficients (k0) were examined. The optimal PA formulation was utilized to fabricate a highly effective nanofibrous composite membrane via spray coating. The resultant composite membrane exhibited a k0 of 18.3 ± 1.3 × 10−7 m/s in an aqueous-aqueous extractive process, significantly outperforming the commercial counterpart with 45% increment. This is the first demonstration of the importance of PDMS macromolecular structures on phenol extraction. The newly-developed condensation-cured PDMS could contribute to the fabrication of highly effective composite membranes for various extractive processes.||URI:||https://hdl.handle.net/10356/85497
|ISSN:||0376-7388||DOI:||http://dx.doi.org/10.1016/j.memsci.2017.10.051||Rights:||© 2017 Elsevier B.V. All rights reserved. This paper was published in Journal of Membrane Science and is made available with permission of Elsevier B.V.||Fulltext Permission:||open||Fulltext Availability:||With Fulltext|
|Appears in Collections:||IGS Journal Articles|
Files in This Item:
|Development of high performance nanofibrous composite membranes by optimizing polydimethylsiloxane architectures for pheonl transport.pdf||1.24 MB||Adobe PDF|
Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.