Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/91428
Title: Dual-band microstrip bandpass filter using stepped-impedance resonators with new coupling schemes
Authors: Zhang, Yue Ping
Sun, Mei
Keywords: DRNTU::Engineering::Electrical and electronic engineering
Issue Date: 2006
Source: Zhang, Y. P., & Sun, M. (2006). Dual-band microstrip bandpass filter using stepped-impedance resonators with new coupling schemes. IEEE Transactions on Microwave Theory and Techniques, 54(10), 3779-3785.
Series/Report no.: IEEE transactions on microwave theory and techniques
Abstract: A microstrip bandpass filter using steppedimpedance resonators is designed in low-temperature co-fired ceramic technology for dual-band applications at 2.4 and 5.2 GHz. New coupling schemes are proposed to replace the normal counterparts. It is found that the new coupling scheme for the interstages can enhance the layout compactness of the bandpass filter; while the new coupling scheme at the input and output can improve the performance of the bandpass filter. To validate the design and analysis, a prototype of the bandpass filter was fabricated and measured. It is shown that the measured and simulated performances are in good agreement. The prototype of the bandpass filter achieved insertion loss of 1.25 and 1.87 dB, S11 of 29 and 40 dB, and bandwidth of 21% and 12.7% at 2.4 and 5.2 GHz, respectively. The bandpass filter is further studied for a single-package solution of dual-band radio transceivers. The bandpass filter is, therefore, integrated into a ceramic ball grid array package. The integration is analyzed with an emphasis on the connection of the bandpass filter to the antenna and to the transceiver die.
URI: https://hdl.handle.net/10356/91428
http://hdl.handle.net/10220/5948
ISSN: 0018-9480
DOI: http://dx.doi.org/10.1109/TMTT.2006.882895
Rights: IEEE Transactions on Microwave Theory and Techniques © 2006 IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE. This material is presented to ensure timely dissemination of scholarly and technical work. Copyright and all rights therein are retained by authors or by other copyright holders. All persons copying this information are expected to adhere to the terms and constraints invoked by each author's copyright. In most cases, these works may not be reposted without the explicit permission of the copyright holder. http://www.ieee.org/portal/site.
Fulltext Permission: open
Fulltext Availability: With Fulltext
Appears in Collections:EEE Journal Articles

Files in This Item:
File Description SizeFormat 
Dual-band microstrip bandpass filter using stepped impedance resonators with new coupling schemes.pdfPublished1.31 MBAdobe PDFThumbnail
View/Open

Google ScholarTM

Check

Altmetric

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.