Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/98491
Title: Measurement of output driver impedance for signal integrity design consideration
Authors: Chang, Richard Weng Yew
See, Kye Yak
Soh, Wei-Shan
Oswal, Manish
Wang, Lin Biao
Keywords: DRNTU::Engineering::Electrical and electronic engineering::Electronic systems::Signal processing
Issue Date: 2009
Source: Chang, R. W. Y., See, K. Y., Soh, W. S., Oswal, M., & Wang, L. B. (2009). Measurement of output driver impedance for signal integrity design consideration. In proceedings of the Asia Pacific Microwave Conference: Singapore, (pp.665-668).
Conference: Asia Pacific Microwave Conference (2009 : Singapore)
Abstract: Impedance matching is crucial in high-speed digital design to ensure signal integrity (SI). Accurate information of a device’s output impedance allows precise selection of series resistor to match the device’s output to the characteristic impedance of the connecting trace. This paper proposes an incircuit measurement technique using two current probes to extract the output impedance information of an active device under its normal operating conditions. The measured impedance has been validated with the time-domain simulation results obtained from CST Design Studio.
URI: https://hdl.handle.net/10356/98491
http://hdl.handle.net/10220/6391
DOI: 10.1109/APMC.2009.5384220
Schools: School of Electrical and Electronic Engineering 
Organisations: Guided Systems Division, DSO National Laboratories
Rights: © 2009 IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE. This material is presented to ensure timely dissemination of scholarly and technical work. Copyright and all rights therein are retained by authors or by other copyright holders. All persons copying this information are expected to adhere to the terms and constraints invoked by each author's copyright. In most cases, these works may not be reposted without the explicit permission of the copyright holder. http://www.ieee.org/portal/site This material is presented to ensure timely dissemination of scholarly and technical work. Copyright and all rights therein are retained by authors or by other copyright holders. All persons copying this information are expected to adhere to the terms and constraints invoked by each author's copyright. In most cases, these works may not be reposted without the explicit permission of the copyright holder.
Fulltext Permission: open
Fulltext Availability: With Fulltext
Appears in Collections:EEE Conference Papers

Files in This Item:
File Description SizeFormat 
Measurement of output driver impedance for signal integrity design consideration.pdf768.56 kBAdobe PDFThumbnail
View/Open

Page view(s) 1

1,807
Updated on Mar 28, 2024

Download(s) 5

667
Updated on Mar 28, 2024

Google ScholarTM

Check

Altmetric


Plumx

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.