dc.contributor.authorChang, Richard Weng Yew
dc.contributor.authorSee, Kye Yak
dc.contributor.authorSoh, Wei-Shan
dc.contributor.authorOswal, Manish
dc.contributor.authorWang, Lin Biao
dc.date.accessioned2010-09-02T06:43:36Z
dc.date.available2010-09-02T06:43:36Z
dc.date.copyright2009en_US
dc.date.issued2009
dc.identifier.citationChang, R. W. Y., See, K. Y., Soh, W. S., Oswal, M., & Wang, L. B. (2009). Measurement of output driver impedance for signal integrity design consideration. In proceedings of the Asia Pacific Microwave Conference: Singapore, (pp.665-668).
dc.identifier.urihttp://hdl.handle.net/10220/6391
dc.description.abstractImpedance matching is crucial in high-speed digital design to ensure signal integrity (SI). Accurate information of a device’s output impedance allows precise selection of series resistor to match the device’s output to the characteristic impedance of the connecting trace. This paper proposes an incircuit measurement technique using two current probes to extract the output impedance information of an active device under its normal operating conditions. The measured impedance has been validated with the time-domain simulation results obtained from CST Design Studio.en_US
dc.format.extent4 p.en_US
dc.language.isoenen_US
dc.rights© 2009 IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE. This material is presented to ensure timely dissemination of scholarly and technical work. Copyright and all rights therein are retained by authors or by other copyright holders. All persons copying this information are expected to adhere to the terms and constraints invoked by each author's copyright. In most cases, these works may not be reposted without the explicit permission of the copyright holder. http://www.ieee.org/portal/site This material is presented to ensure timely dissemination of scholarly and technical work. Copyright and all rights therein are retained by authors or by other copyright holders. All persons copying this information are expected to adhere to the terms and constraints invoked by each author's copyright. In most cases, these works may not be reposted without the explicit permission of the copyright holder.en_US
dc.subjectDRNTU::Engineering::Electrical and electronic engineering::Electronic systems::Signal processing
dc.titleMeasurement of output driver impedance for signal integrity design considerationen_US
dc.typeConference Paper
dc.contributor.conferenceAsia Pacific Microwave Conference (2009 : Singapore)en_US
dc.contributor.schoolSchool of Electrical and Electronic Engineeringen_US
dc.identifier.doihttp://dx.doi.org/10.1109/APMC.2009.5384220
dc.description.versionPublished versionen_US
dc.contributor.organizationGuided Systems Division, DSO National Laboratoriesen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record