dc.contributor.authorDong, Zhili
dc.contributor.authorWei, B.
dc.contributor.authorWhite, Timothy John
dc.identifier.citationDong, Z. L., Wei, B., & White, T. J. (2001). Study of Calcium/Lead Apatite Structure Type for Stabilising Heavy Metals. Materials Research Society Symposium Proceedings, 658..en_US
dc.description.abstract(CaxPb10-x)(VO4)6F2 apatites were synthesised and their microstructures were studied using powder X-ray diffraction, scanning electron microscopy and transmission electron microscopy before and after leach testing. X-ray diffraction showed that the apatites were hexagonal with a ≈ 10Å and c ≈ 7Å. During the leach test, Pb was released into the solution more slowly than Ca, which is desirable as the immobilisation of Pb is of importance. The experimental results also showed that V was almost undetectable in the leaching test solutions. In the (Ca7Pb3)(VO4)6F2 pellet, Ca and Pb distributions were not homogenous from one grain to another. Microstructural evidence from scanning electron microscopy revealed that the dissolution via development of etch pits began at grain boundaries and inside grains, and progressed faster in Ca rich regions. These results suggest that apatites of high Pb to Ca ratio are more durable.en_US
dc.format.extent6 p.
dc.rights© 2000 Materials Research Society. This paper was published in Materials Research Society Symposium Proceedings and is made available as an electronic reprint (preprint) with permission of Materials Research Society. The paper can be found at the following DOI: http://dx.doi.org/ 10.1557/PROC-658-GG6.33. One print or electronic copy may be made for personal use only. Systematic or multiple reproduction, distribution to multiple locations via electronic or other means, duplication of any material in this paper for a fee or for commercial purposes, or modification of the content of the paper is prohibited and is subject to penalties under law.en_US
dc.titleStudy of calcium/lead apatite structure type for stabilising heavy metalsen_US
dc.typeConference Paper
dc.contributor.conferenceMaterials Research Society Symposium (2001)en_US
dc.contributor.schoolSchool of Materials Science and Engineeringen_US
dc.identifier.doihttp://dx.doi.org/ 10.1557/PROC-658-GG6.33
dc.description.versionPublished versionen_US

Files in this item


This item appears in the following Collection(s)

Show simple item record