Selection of series compensation parameters for closed loop rotor vibratory gyroscope
Date of Issue
2011School
School of Mechanical and Aerospace Engineering
Version
Accepted version
Abstract
This article presents an approach to the selection of the Series Compensation (SC) parameters for a Rotor Vibratory Gyroscope in closed loop operation (RVG), to meet the necessary quality of dynamical and statical characteristics of such a gyroscope output. The proposed approach is based on the developed mathematical model of a RVG as a two axis control system with modulation. The analysis of this model allows us to reveal some peculiarities of the system, for instance, the effect of limited quality factor. The influence of these observed peculiarities on the dynamical and statical characteristics of a RVG are studied and reflected in the proposed approach. Finally, the selection of the SC parameters, by means of the proposed approach is illustrated with a RVG, designed by the Arzamas Research & Production Joint Stock Company "Temp-Avia".
Subject
DRNTU::Engineering::Mechanical engineering::Kinematics and dynamics of machinery
Type
Journal Article
Series/Journal Title
IEEE sensors journal
Rights
© 2011 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works. The published version is available at: [DOI: http://dx.doi.org/10.1109/JSEN.2011.2169784].
Collections
http://dx.doi.org/10.1109/JSEN.2011.2169784
Get published version (via Digital Object Identifier)
