dc.contributor.authorSong, Chaolong
dc.contributor.authorNguyen, Nam-Trung
dc.contributor.authorTan, Say-Hwa
dc.contributor.authorAsundi, Anand Krishna
dc.date.accessioned2012-04-12T00:48:54Z
dc.date.available2012-04-12T00:48:54Z
dc.date.copyright2010en_US
dc.date.issued2010
dc.identifier.citationSong, C., Nguyen, N. T., Tan, S. H. & Asundi, A. K. (2010). A tuneable micro-optofluidic biconvex lens with mathematically predictable focal length. Microfluidics and Nanofluidics, 9(4-5), 889-896.en_US
dc.identifier.urihttp://hdl.handle.net/10220/7733
dc.description.abstractRecent research efforts have been increasingly focused on the development of microlenses. Of great interest are in-plane optofluidic lenses due to the possibility of integrating them directly into a microfluidic network. Furthermore, the tunability of optofluidic lenses makes them more adaptive to lab-on-a-chip (LOC) system for biological and chemical analysis. However, the predictability of the performance of the current optofluidic lenses is limited by the lack of a simple explicit mathematical model. Previously, we proposed a model based on dipole flow theory to calculate the flow field in a circular chamber where the optofluidic lens is formed. However, this method assumes that both the core and cladding liquids have the same viscosity. In this article, hydrodynamic spreading theory is used to model the opening angles of the core stream and the cladding stream at the entrance of the circular chamber. Subsequently, the curvature of the lens interface for each corresponding opening angle of the core stream can be determined. The focal length of the optofluidic lens formed in the circular chamber can be analytically formulated, which can help to determine the position of focal point for a given flow condition. Experiments were carried out to verify this new model. Ray-tracing method was used experimentally and numerically to measure the focal length. The theoretical results agree well with both experimental and numeric results.en_US
dc.language.isoenen_US
dc.relation.ispartofseriesMicrofluidics and nanofluidicsen_US
dc.rights© 2010 Springer-Verlag. This is the author created version of a work that has been peer reviewed and accepted for publication by Microfluidics and Nanofluidics, Springer-Verlag. It incorporates referee’s comments but changes resulting from the publishing process, such as copyediting, structural formatting, may not be reflected in this document. The published version is available at: [DOI: http://dx.doi.org/10.1007/s10404-010-0608-1].en_US
dc.subjectDRNTU::Engineering::Mechanical engineering
dc.titleA tuneable micro-optofluidic biconvex lens with mathematically predictable focal lengthen_US
dc.typeJournal Article
dc.contributor.schoolSchool of Mechanical and Aerospace Engineeringen_US
dc.identifier.doihttp://dx.doi.org/10.1007/s10404-010-0608-1
dc.description.versionAccepted version
dc.identifier.rims152456


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record