dc.contributor.authorTang, Yuxin
dc.contributor.authorGong, Dangguo
dc.contributor.authorLai, Yuekun
dc.contributor.authorShen, Yiqiang
dc.contributor.authorZhang, Yanyan
dc.contributor.authorHuang, Yizhong
dc.contributor.authorTao, Jie
dc.contributor.authorLin, Changjian
dc.contributor.authorDong, Zhili
dc.contributor.authorChen, Zhong
dc.date.accessioned2012-05-22T06:48:17Z
dc.date.available2012-05-22T06:48:17Z
dc.date.copyright2010en_US
dc.date.issued2010
dc.identifier.citationTang, Y., Gong, D., Lai, Y., Shen, Y., Zhang, Y., Hu, Y. et al. (2010). Hierarchical layered titanate microspherulite: formation by electrochemical spark discharge spallation and application in aqueous pollutant treatment. Journal of Materials Chemistry, 20(45).en_US
dc.identifier.urihttp://hdl.handle.net/10220/8110
dc.description.abstractAn ultrafast and template-free method to synthesize three-dimensional (3D) hierarchical layered titanate microspherulite (TMS) particles with high surface area is reported. The synthesis makes use of an electrochemical spark discharge spallation (ESDS) process, during which a fast anodic reaction on the titanium surface creates a layer of titanium dioxide that instantly breaks down by the applied electrical field into the solution in the form of titanium oxide particles. The spalled particles readily react with the heated NaOH electrolyte to form the titanate particles. A typical as-prepared TMS with a diameter of 0.4~1.5 μm is synthesized by ESDS of Ti foils in 10 M NaOH solution under an applied current density of 0.5 A cm-2, leading to a reaction yield of approximately 0.10~0.15 g per square centimetre of exposed Ti foil within 20 min. After hydrogen ion exchange, the surface area can reach as high as ~406 m2 g-1. On the Ti surface, a crystalline rutile TiO2 nanosheet structure is formed, which is attributed to the local exothermic heat caused by the spark discharge. A formation mechanism of the TMS is discussed based on field emission scanning electron microscopy (FESEM), a transmission electron microscopy (TEM) study and Raman scattering spectroscopy analysis. The as-prepared TMS shows excellent adsorption performance compared with a titanate micro-particle (TMP), nanowire (TNW) and nanotube (TNT) when methylene blue (MB) and PbII ions are used as representative organic and inorganic pollutants. The mechanism of adsorption has also been discussed.en_US
dc.format.extent25 p.en_US
dc.language.isoenen_US
dc.relation.ispartofseriesJournal of materials chemistryen_US
dc.rights© 2010 Royal Society of Chemistry. This is the author created version of a work that has been peer reviewed and accepted for publication by Journal of Materials Chemistry, RSC. It incorporates referee’s comments but changes resulting from the publishing process, such as copyediting, structural formatting, may not be reflected in this document. The published version is available at: [DOI: http://dx.doi.org/10.1039/C0JM02005B ].en_US
dc.subjectDRNTU::Engineering::Materials
dc.titleHierarchical layered titanate microspherulite : formation by electrochemical spark discharge spallation and application in aqueous pollutant treatmenten_US
dc.typeJournal Article
dc.contributor.schoolSchool of Materials Science and Engineeringen_US
dc.identifier.doihttp://dx.doi.org/10.1039/C0JM02005B
dc.description.versionAccepted versionen_US
dc.contributor.organizationCollege of Material Science and Technology, Nanjing University of Aeronautics and Astronauticsen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record