dc.contributor.authorLim, Linda Ying Wen
dc.contributor.authorTang, Yuxin
dc.contributor.authorCheng, Yu Hua
dc.contributor.authorChen, Zhong
dc.date.accessioned2012-05-25T03:00:52Z
dc.date.available2012-05-25T03:00:52Z
dc.date.copyright2010en_US
dc.date.issued2010
dc.identifier.citationLim, L. Y. W., Tang, Y., Cheng, Y. H., & Chen, Z. (2010). Morphology, crystal structure and adsorption performance of hydrothermally synthesized titania and titanate nanostructures. Nanoscale, 2, 2751-2757.en_US
dc.identifier.urihttp://hdl.handle.net/10220/8146
dc.description.abstractTitania (TiO2) and sodium titanate nanostructures with controllable phases and morphologies were synthesized by hydrothermal method with titanium disulfide (TiS2) as the starting material. Sodium 5 titanate nanobelts could be synthesized under a relatively low alkaline concentration (1 mol L-1 NaOH) and short duration (6 hours). At 3 mol L-1 HCl, rutile TiO2 nanorods were synthesized. Anatase TiO2 nanoparticles were obtained under pH values ranged between 2 to 13. FTIR analysis confirmed the phase change as the pH of the reacting medium increased from highly acidic to highly alkaline condition. The adsorption of methylene blue (MB) on the as-synthesized sodium titanate nanobelts 10 fitted well with the Langmuir monolayer model, with an adsorption capacity as high as 312.5 mg g-1. The kinetics of MB adsorption was found to be pseudo-second-order kinetic model. In brief, this study demonstrates a simple method to control the phase and morphology of titanium-based oxides. Excellent performance has been shown in the MB adsorption test by the sodium titanate nanostructures.en_US
dc.format.extent14 p.
dc.language.isoenen_US
dc.relation.ispartofseriesNanoscaleen_US
dc.rights© 2010 The Royal Society of Chemistry.This is the author created version of a work that has been peer reviewed and accepted for publication by Nanoscale, Royal Society of Chemistry. It incorporates referee’s comments but changes resulting from the publishing process, such as copyediting, structural formatting, may not be reflected in this document. The published version is available at: [http://dx.doi.org/10.1039/c0nr00440e].en_US
dc.subjectDRNTU::Engineering::Materials::Nanostructured materials
dc.titleMorphology, crystal structure and adsorption performance of hydrothermally synthesized titania and titanate nanostructuresen_US
dc.typeJournal Article
dc.contributor.schoolSchool of Materials Science and Engineeringen_US
dc.identifier.doihttp://dx.doi.org/10.1039/c0nr00440e
dc.description.versionAccepted versionen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record