dc.contributor.authorFarrokhi, H.
dc.contributor.authorZhou, Wei
dc.contributor.authorZheng, H. Y.
dc.contributor.authorLi, Z. L.
dc.identifier.citationFarrokhi, H., Zhou, W., Zheng, H. Y., & Li, Z. L. (2012). Non-ablative texturing of silicon surface with a continuous wave fiber laser. Optics Express, 20(21), 23180-23185.en_US
dc.description.abstractLaser surface texturing based on ablation has been widely used, but hardly any reports can be found on non-ablative laser surface texturing. Silicon is highly transparent to the infrared wavelength of fiber laser (λ = 1090 nm) and thus regarded as an unsuitable tool for the purpose of surface texturing. However, we succeeded in using a continuous wave fiber laser to produce regular arrays of sub-micron bumps on silicon surface. The approach is shown to be based on laser-induced oxidation of silicon.en_US
dc.relation.ispartofseriesOptics expressen_US
dc.rights© 2012 Optical Society of America. This paper was published in Optics Express and is made available as an electronic reprint (preprint) with permission of Optical Society of America. The paper can be found at the following official DOI: [http://dx.doi.org/10.1364/OE.20.023180]. One print or electronic copy may be made for personal use only. Systematic or multiple reproduction, distribution to multiple locations via electronic or other means, duplication of any material in this paper for a fee or for commercial purposes, or modification of the content of the paper is prohibited and is subject to penalties under law.en_US
dc.titleNon-ablative texturing of silicon surface with a continuous wave fiber laseren_US
dc.typeJournal Article
dc.contributor.schoolSchool of Mechanical and Aerospace Engineeringen_US
dc.description.versionPublished versionen_US

Files in this item


This item appears in the following Collection(s)

Show simple item record