Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/100064
Full metadata record
DC FieldValueLanguage
dc.contributor.authorPeriyasamy, Vijithaen
dc.contributor.authorSil, Sanchitaen
dc.contributor.authorDhal, Gaganen
dc.contributor.authorAriese, Freeken
dc.contributor.authorUmapathy, Sivaen
dc.contributor.authorPramanik, Manojiten
dc.date.accessioned2015-05-27T04:09:22Zen
dc.date.accessioned2019-12-06T20:16:02Z-
dc.date.available2015-05-27T04:09:22Zen
dc.date.available2019-12-06T20:16:02Z-
dc.date.copyright2015en
dc.date.issued2015en
dc.identifier.citationPeriyasamy, V., Sil, S., Dhal, G., Ariese, F., Umapathy, S., & Pramanik, M. (2015). Experimentally validated raman Monte Carlo simulation for a cuboid object to obtain raman spectroscopic signatures for hidden material. Journal of raman spectroscopy, 46(7), 669-676.en
dc.identifier.issn0377-0486en
dc.identifier.urihttps://hdl.handle.net/10356/100064-
dc.identifier.urihttp://hdl.handle.net/10220/25685en
dc.description.abstractIn conventional Raman spectroscopic measurements of liquids or surfaces the preferred geometry for detection of the Raman signal is the backscattering (or reflection) mode. For nontransparent layered materials, sub-surface Raman signals have been retrieved using spatially offset Raman spectroscopy (SORS), usually with light collection in the same plane as the point of excitation. However, as a result of multiple scattering in a turbid medium, Raman photons will be emitted in all directions. In this study, Monte Carlo simulations for a three-dimensional layered sample with finite geometry have been performed to confirm the detectability of Raman signals at all angles and at all sides of the object. We considered a non-transparent cuboid container (high density polyethylene) with explosive material (ammonium nitrate) inside. The simulation results were validated with experimental Raman intensities. Monte Carlo simulation results reveal that the ratio of sub-surface to surface signals improves at geometries other than backscattering. In addition, we demonstrate through simulations the effects of the absorption and scattering coefficients of the layers, and that of the diameter of the excitation beam. The advantage of collecting light from all possible 4π angles, over other collection modes is that this technique is not geometry specific and molecular identification of layers underneath nontransparent surfaces can be obtained with minimal interference from the surface layer. To what extent all sides of the object will contribute to the total signal will depend on the absorption and scattering coefficients and the physical dimensions.en
dc.language.isoenen
dc.relation.ispartofseriesJournal of raman spectroscopyen
dc.rights© 2015 John Wiley & Sons Ltd. This is the author created version of a work that has been peer reviewed and accepted for publication by Journal of Raman Spectroscopy, John Wiley & Sons Ltd. It incorporates referee’s comments but changes resulting from the publishing process, such as copyediting, structural formatting, may not be reflected in this document. The published version is available at: [http://dx.doi.org/10.1002/jrs.4709].en
dc.subjectDRNTU::Science::Medicine::Biomedical engineeringen
dc.titleExperimentally validated raman Monte Carlo simulation for a cuboid object to obtain raman spectroscopic signatures for hidden materialen
dc.typeJournal Articleen
dc.contributor.schoolSchool of Chemical and Biomedical Engineeringen
dc.identifier.doihttp://dx.doi.org/10.1002/jrs.4709en
dc.description.versionAccepted versionen
dc.identifier.rims186440en
item.grantfulltextopen-
item.fulltextWith Fulltext-
Appears in Collections:SCBE Journal Articles
Files in This Item:
File Description SizeFormat 
rmcc_vpss_revision5_final1.pdf1.72 MBAdobe PDFThumbnail
View/Open

Google ScholarTM

Check

Altmetric

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.