Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/101477
Full metadata record
DC FieldValueLanguage
dc.contributor.authorRahardjo, Hariantoen
dc.contributor.authorYoo, K. S.en
dc.date.accessioned2011-12-08T04:01:07Zen
dc.date.accessioned2019-12-06T20:39:05Z-
dc.date.available2011-12-08T04:01:07Zen
dc.date.available2019-12-06T20:39:05Z-
dc.date.copyright2010en
dc.date.issued2010en
dc.identifier.citationYoo, K. S., & Rahardjo, H. (2010). Modification of Volumetric Pressure Plate Extractor. Journal of ASTM International, 7(9).en
dc.identifier.urihttps://hdl.handle.net/10356/101477-
dc.identifier.urihttp://hdl.handle.net/10220/7361en
dc.description.abstractA volumetric pressure plate (extractor) can be used to measure the soil-water characteristic curve in the laboratory using the axis translation technique. The volume of extracted water from the soil specimen in the volumetric pressure plate can be continuously measured during the test without the stoppage of air pressure during the measurements. However, the water volume measurement in the volumetric pressure plate requires an air trap, a ballast tube, a burette, and a vacuum device while maintaining a constant pore-water pressure in the soil specimen, which is quite complicated and tedious. In order to improve the measuring method of the volumetric pressure plate, a modified volumetric pressure plate was developed and tested on residual soil specimens. The modified apparatus can measure the volume of the extracted water using both Method A and Method B of ASTM D6836-02 depending on the range of matric suction. In addition, the volume of diffused air during testing can also be measured for correcting the water volume change measurements. The improvements of the modified apparatus and typical results obtained from the tests are discussed in the paper.en
dc.language.isoenen
dc.relation.ispartofseriesJournal of ASTM internationalen
dc.rights© 2010 ASTMen
dc.subjectDRNTU::Engineering::Civil engineering::Geotechnicalen
dc.titleModification of volumetric pressure plate extractoren
dc.typeJournal Articleen
dc.contributor.schoolSchool of Civil and Environmental Engineeringen
dc.identifier.doihttp://dx.doi.org/10.1520/JAI103075en
dc.description.versionAccepted versionen
item.grantfulltextnone-
item.fulltextNo Fulltext-
Appears in Collections:CEE Journal Articles

Google ScholarTM

Check

Altmetric

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.