Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/101555
Full metadata record
DC FieldValueLanguage
dc.contributor.authorZhang, T. S.en
dc.contributor.authorKong, Ling Bingen
dc.contributor.authorSong, X. C.en
dc.contributor.authorDu, Z. H.en
dc.contributor.authorXu, W. Q.en
dc.contributor.authorLi, S.en
dc.date.accessioned2014-11-04T08:41:16Zen
dc.date.accessioned2019-12-06T20:40:32Z-
dc.date.available2014-11-04T08:41:16Zen
dc.date.available2019-12-06T20:40:32Z-
dc.date.copyright2013en
dc.date.issued2013en
dc.identifier.citationZhang, T., Kong, L., Song, X., Du, Z., Xu, W., & Li, S. (2014). Densification behaviour and sintering mechanisms of Cu- or Co-doped SnO2 : a comparative study. Acta materialia, 62, 81-88.en
dc.identifier.issn1359-6454en
dc.identifier.urihttps://hdl.handle.net/10356/101555-
dc.identifier.urihttp://hdl.handle.net/10220/24178en
dc.description.abstractCompared with the CuO–SnO2 system, there is a lack of experimental evidence of a eutectic liquid phase in the CoO–SnO2 system. It is therefore believed that the densification behaviour and sintering mechanisms of the two systems are completely different. However, our present study clearly demonstrated that the Co- and Cu-doped SnO2 ceramics exhibited a similar densification behaviour. The 1 wt.% Cu- or Co-doped SnO2 ceramics could reach over 95% relative density when sintered to 1250 °C with a heating rate of 5 °C min−1. It was found that both CoO4/3- and CuO-doped SnO2 follow the same mass transport mechanism – viscous flow sintering during early-stage sintering. This was verified with the classic isothermal and constant-heating-rate models, as well as Frenkel’s viscous flow theory. The viscous flow mechanism dominated densification up to ∼73 and ∼78% relative density with the apparent activation energies of 362 and 440 kJ mol−1 for Co and Cu doping cases, respectively.en
dc.language.isoenen
dc.relation.ispartofseriesActa materialiaen
dc.rights© 2013 Acta Materialia Inc.en
dc.subjectDRNTU::Engineering::Materials::Mechanical strength of materialsen
dc.titleDensification behaviour and sintering mechanisms of Cu- or Co-doped SnO2 : a comparative studyen
dc.typeJournal Articleen
dc.contributor.schoolSchool of Materials Science and Engineeringen
dc.identifier.doihttp://dx.doi.org/10.1016/j.actamat.2013.09.031en
item.grantfulltextnone-
item.fulltextNo Fulltext-
Appears in Collections:MSE Journal Articles

Google ScholarTM

Check

Altmetric

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.