Please use this identifier to cite or link to this item:
Full metadata record
DC FieldValueLanguage
dc.contributor.authorBan, Yonglingen
dc.contributor.authorChen, Jinhuaen
dc.contributor.authorSun, Sichengen
dc.contributor.authorLi, Joshua Leweien
dc.contributor.authorGuo, Jinhongen
dc.identifier.citationBan, Y., Chen, J., Sun, S., Li, J. L., & Guo, J. (2012). Printed wideband antenna with chip-capacitor-loaded inductive strip for lte/Gsm/Umts wwan wireless usb dongle applications. Progress in electromagnetics research, 128, 313-329.en
dc.description.abstractThis paper proposes a planar printed wideband antenna for eight-band LTE/GSM/UMTS WWAN wireless USB dongle applications. An inductive shorted strip with a chip capacitor loaded is employed in order to improve the characteristics of small-size terminal antennas which usually have a narrow band over the LTE700/GSM850/900 (698-960 MHz) operation. While the desired upper band is mainly realized by the rectangular radiating patch, covering DCS1800/PCS1900/UMTS2100/LTE2300/2500 (1710-2690 MHz) band. Easily printed on a 0.8-mm thick FR4 dielectric substrate of size 20×70 mm², the proposed antenna structure occupies a compact size of 20×19 mm². Then the proposed design can be attached to laptop computer by the USB interface. Good radiation efficiency and antenna gain for frequencies over the desired operating bands is obtained. Detailed design considerations of the proposed antenna are described, and both experimental and simulation results are also presented and discussed.en
dc.relation.ispartofseriesProgress in electromagnetics researchen
dc.rights© 2012 EMW Publishing. This paper was published in Progress In Electromagnetics Research and is made available as an electronic reprint (preprint) with permission of EMW Publishing. The paper can be found at the following official DOI: []. One print or electronic copy may be made for personal use only. Systematic or multiple reproduction, distribution to multiple locations via electronic or other means, duplication of any material in this paper for a fee or for commercial purposes, or modification of the content of the paper is prohibited and is subject to penalties under law.en
dc.subjectDRNTU::Engineering::Chemical engineeringen
dc.titlePrinted wideband antenna with chip-capacitor-loaded inductive strip for lte/Gsm/Umts wwan wireless usb dongle applicationsen
dc.typeJournal Articleen
dc.contributor.schoolSchool of Chemical and Biomedical Engineeringen
dc.description.versionPublished versionen
item.fulltextWith Fulltext-
Appears in Collections:SCBE Journal Articles
Files in This Item:
File Description SizeFormat 
Printed wideband antenna with chip-capacitor-loaded inductive strip f.pdf1.54 MBAdobe PDFThumbnail

Google ScholarTM




Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.