Please use this identifier to cite or link to this item:
Full metadata record
DC FieldValueLanguage
dc.contributor.authorNatarajan, Lakshmien
dc.contributor.authorNew, Jackieen
dc.contributor.authorDasari, Aravinden
dc.contributor.authorYu, Suzhuen
dc.contributor.authorManan, Munirah Abdulen
dc.identifier.citationNatarajan, L., New, J., Dasari, A., Yu, S., & Manan, M. A. (2014). Surface morphology of electrospun PLA fibers : mechanisms of pore formation. RSC advances, 4(83), 44082-44088.en
dc.description.abstractThe article elucidates the mechanisms of formation of varying degrees of surface pores/pits on polylactic acid (PLA) fibers during electrospinning. The role of a combination of different parameters in governing pore formation was demonstrated. They include solvent vapor pressure (pv), solvent miscibility/interaction with water, solubility parameter, and relative humidity (RH) within the spinning unit. Our results indicated that traditional mechanisms like thermally induced phase separation (TIPS) and vapor induced phase separation (VIPS) were not responsible in the generation of surface porosity/pits. Instead, higher RH (water vapor, a non-solvent of the polymer), and its miscibility/interaction with solvent(s) were concluded to be relatively more important than the simple presence of a high pv solvent or a combination of high pv and low pv solvent system. Further, content of high pv solvent in solution determined the spherical or elliptical nature of pores/pits by affecting the level of saturation of nearby region of the interface between jet and air during the electrospinning process.en
dc.relation.ispartofseriesRSC advancesen
dc.rights© 2014 The Authors. This is the author created version of a work that has been peer reviewed and accepted for publication in RSC Advances, published by Royal Society of Chemistry on behalf of The Authors. It incorporates referee’s comments but changes resulting from the publishing process, such as copyediting, structural formatting, may not be reflected in this document. The published version is available at: [Article DOI:].en
dc.subjectDRNTU::Engineering::Materials::Mechanical strength of materialsen
dc.titleSurface morphology of electrospun PLA fibers : mechanisms of pore formationen
dc.typeJournal Articleen
dc.contributor.schoolSchool of Materials Science & Engineeringen
dc.contributor.organizationA*STAR SIMTechen
dc.description.versionAccepted versionen
item.fulltextWith Fulltext-
Appears in Collections:MSE Journal Articles
Files in This Item:
File Description SizeFormat 
Surface morphology of electrospun PLA fibers mechanisms of pore formation.pdf789.21 kBAdobe PDFThumbnail

Citations 5

Updated on Mar 6, 2021

Citations 5

Updated on Mar 3, 2021

Page view(s) 20

Updated on May 23, 2022

Download(s) 10

Updated on May 23, 2022

Google ScholarTM




Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.